Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 86
Reminders
CLI reminders prompt users to complete configuration tasks that require multiple steps. The default setting
for CLI reminders is enabled. Use the following command to disable CLI reminders: /cfg/sys/reminders
dis
The following is an example of a configuration task performed with CLI reminders enabled.
>> Layer 2# vlan 5
VLAN number 5 with name "VLAN 5" created.
Reminder: VLAN 5 needs to be enabled.
>> VLAN 5# add 9
Port 9 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 5 [y/n]: y
Current ports for VLAN 5: empty
Pending new ports for VLAN 5: 9
Reminder: Port 9 needs to be enabled.
Reminder: VLAN 5 needs to be enabled.
System configuration
Command: /cfg/sys
[System Menu]
syslog - Syslog Menu
sshd - SSH Server Menu
radius - RADIUS Authentication Menu
tacacs+ - TACACS+ Authentication Menu
ntp - NTP Server Menu
ssnmp - System SNMP Menu
access - System Access Menu
date - Set system date
time - Set system time
timezone - Set system timezone
olddst - Set system DST for US
dlight - Set system daylight savings
idle - Set timeout for idle CLI sessions
notice - Set login notice
bannr - Set login banner
hprompt - Enable/disable display hostname (sysName) in CLI prompt
bootp - Enable/disable use of BOOTP
dhcp - Enable/disable use of DHCP on Mgmt interface
reminders - Enable/disable Reminders
cur - Display current system-wide parameters
This menu provides configuration of switch management parameters such as user and administrator
privilege mode passwords, browser-based management settings, and management access list.