Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 89
Secure Shell can be configured on the switch using the console port and Telnet only. The menu options
do not display if you access the switch using the Browser-based Interface (BBI).
NOTE: See the N8406-026 10Gb Intelligent L3 Switch Application Guide for information on SSH.
The following table describes the SSHD Configuration Menu options.
Table 81 SSHD Configuration Menu options
Command
Description
intrval <0-24>
Defines interval for auto-generating the RSA server key. The switch
will auto-generate the RSA server key at the interval defined in this
command. The value of zero (0) means the RSA server key auto-
generation is disabled. If the switch has been busy performing any
other key generation and the assigned time of interval expires,
the RSA server will skip generating the key.
scpadm
Defines the administrator password that is for Secure Copy (SCP)
only. The username for this SCP administrator is scpadmin.
Typically, SCP is used to copy files securely from one machine to
another. In the switch, SCP is used to download and upload the
switch configuration using secure channels.
hkeygen
Generates the RSA host keys manually. The switch creates this key
automatically while configuring the switch with Secure Shell (SSH).
But you can generate the key manually by using this command if
you need to overwrite the key for security reasons. The command
will take effect immediately without executing the apply
command.
skeygen
Generates the RSA server key. The switch creates this key
automatically while configuring the switch with Secure Shell (SSH).
You can generate the key manually by using this command if you
need to overwrite the key for security reasons. The command will
take effect immediately without executing the apply command.
sshport <TCP port number>
Sets the SSH server port number.
ena
Enables the SCP apply and save.
dis
Disables the SCP apply and save. This is the default for SCP.
on
Enables the SSH server.
off
Disables the SSH server. This is the default for the SSH server.
cur
Displays the current SSH server configuration.
RADIUS server configuration
Command: /cfg/sys/radius
[RADIUS Server Menu]
prisrv - Set primary RADIUS server address
secsrv - Set secondary RADIUS server address
secret - Set primary RADIUS server secret
secret2 - Set secondary RADIUS server secret
port - Set RADIUS port
retries - Set RADIUS server retries
timeout - Set RADIUS server timeout
bckdoor - Enable/disable RADIUS backdoor for telnet/ssh/http/https
secbd - Enable/disable RADIUS secure backdoor for telnet/ssh/http/https
on - Turn RADIUS authentication ON
off - Turn RADIUS authentication OFF
cur - Display current RADIUS configuration
NOTE: See the N8406-026 10Gb Intelligent L3 Switch Application Guide for information on RADIUS.