Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 94
The following table describes the SNMPv3 Configuration Menu options.
Table 86 SNMPv3 Configuration Menu options
Command
Description
usm <1-16>
Configures a user security model (USM) entry for an authorized user. You can
also configure this entry through SNMP. The range is 1-16.
view <1-128>
Configures different MIB views. The range is 1-128.
access <1-32>
Configures access rights. The range is 1-32.
group <1-16>
Configures an SNMP group. A group maps the user name to the access group
names and their access rights needed to access SNMP management objects.
A group defines the access rights assigned to all names that belong to a
particular group. The range is 1-16.
comm <1-16>
Configures a community table entry. The community table contains objects for
mapping community strings and version-independent SNMP message
parameters.
The range is 1-16.
taddr <1-16>
Configures the destination address and user security levels for outgoing
notifications. This is also called the transport endpoint. The range is 1-16.
tparam <1-16>
Configures SNMP parameters, consisting of message processing model,
security model, security level, and security name information. There may be
multiple transport endpoints associated with a particular set of SNMP
parameters, or a particular transport endpoint may be associated with several
sets of SNMP parameters.
notify <1-16>
Configures a notification index. A notification application typically monitors a
system for particular events or conditions, and generates Notification-Class
messages based on these events or conditions. The range is 1-16.
v1v2 disable|enable
Enables or disables the access to SNMP version 1 and version 2. This command
is enabled by default.
cur
Displays the current SNMPv3 configuration.
User Security Model configuration
Command: /cfg/sys/ssnmp/snmpv3/usm <usm number>
[SNMPv3 usmUser 1 Menu]
name - Set USM user name
auth - Set authentication protocol
authpw - Set authentication password
priv - Set privacy protocol
privpw - Set privacy password
del - Delete usmUser entry
cur - Display current usmUser configuration
You can make use of a defined set of user identities using this Security Model. An SNMP engine must have
the knowledge of applicable attributes of a user.