Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 99
The following table describes the SNMPv3 Target Parameters Table Configuration Menu options.
Table 93 SNMPv3 Target Parameters Table Configuration Menu options
Command
Description
name <1-32
characters>
Configures the locally arbitrary, but unique identifier that is associated with this
entry.
mpmodel
snmpv1|snmpv2c|snm
pv3
Configures the message processing model that is used to generate SNMP
messages.
model
usm|snmpv1|snmpv2
Selects the security model to be used when generating the SNMP messages.
uname <1-32
characters>
Defines the name that identifies the user in the USM table, on whose behalf the
SNMP messages are generated using this entry.
level
noAuthNoPriv|authN
oPriv|authPriv
Selects the level of security to be used when generating the SNMP messages using
this entry. The level noAuthNoPriv means that the SNMP message will be sent
without authentication and without using a privacy protocol. The level
authNoPriv means that the SNMP message will be sent with authentication but
without using a privacy protocol. The authPriv means that the SNMP message
will be sent both with authentication and using a privacy protocol.
del
Deletes the targetParamsTable entry.
cur
Displays the current targetParamsTable configuration.
SNMPv3 Notify Table configuration
Command: /cfg/sys/ssnmp/snmpv3/notify <notify number>
[SNMPv3 snmpNotifyTable 1 Menu]
name - Set notify name
tag - Set notify tag
del - Delete notifyTable entry
cur - Display current notifyTable configuration
SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for
particular events or conditions, and generates Notification-Class messages based on these events or
conditions.
The following table describes the SNMPv3 Notify Table Configuration menu options.
Table 94 SNMPv3 Notify Table Configuration Menu options
Command
Description
name <1-32
characters>
Defines a locally arbitrary but unique identifier associated with this SNMP notify
entry.
tag <1-255
characters>
Defines a tag of 255 characters maximum that contains a tag value which is used
to select entries in the Target Address Table. Any entry in the
snmpTargetAddrTable, that matches the value of this tag, is selected.
del
Deletes the notify table entry.
cur
Displays the current notify table configuration.
System Access configuration
Command: /cfg/sys/access
[System Access Menu]
mgmt - Management Network Definition Menu
user - User Access Control Menu (passwords)
http - Enable/disable HTTP (Web) access
https - HTTPS Web Access Menu
wport - Set HTTP (Web) server port number
snmp - Set SNMP access control
tsbbi - Enable/disable telnet/ssh configuration from BBI
tnet - Enable/disable Telnet access
tnport - Set Telnet server port number
tport - Set the TFTP Port for the system
cur - Display current system access configuration