Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 118
Network Filter configuration
The following table describes the Network Filter Configuration commands.
Table 126 Network Filter Configuration commands
Command
Description
ip match-address <1-256> <IP
address> <IP netmask>
Sets the starting IP address and the IP subnet mask for this filter.
Command mode: Global configuration
ip match-address <1-256> enable
Enables the Network Filter configuration.
Command mode: Global configuration
no ip match-address <1-256>
enable
Disables the Network Filter configuration.
Command mode: Global configuration
no ip match-address <1-256>
Deletes the Network Filter configuration.
Command mode: Global configuration
show ip match-address [<1-256>]
Displays the current the Network Filter configuration.
Command mode: All