Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 120
IP Access List configuration
The route map number (1-32) and the access list number (1-8) represent the IP access list you wish to
configure. The following table describes the IP Access List Configuration commands.
Table 128 IP Access List Configuration commands
Command
Description
[no] access-list <1-8> match-
address <1-256>
Sets the network filter number.
Command mode: Route Map
[no] access-list <1-8> metric
<1-1677214>
Sets the metric value in the AS-External (ASE) LSA.
Command mode: Route Map
access-list <1-8> action
{permit|deny}
Permits or denies action for the access list.
Command mode: Route Map
access-list <1-8> enable
Enables the access list.
Command mode: Route Map
no access-list <1-8> enable
Disables the access list.
Command mode: Route Map
no access-list <1-8>
Deletes the access list.
Command mode: Route Map
show route-map <1-32> access-
list {<1-8>}
Displays the current Access List configuration.
Command mode: All