Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 122
Table 130 RIP Interface Configuration commands
Command
Description
[no] ip rip default-action
{both|listen|supply}
When listen, the switch accepts RIP default routes from other routers,
but gives them lower priority than configured default gateways. When
supply, the switch sends RIP default routes to other routers. When both,
the switch operates as both "listen" and "supply". When no, the switch
rejects RIP default routes. This command is disabled by default.
Command mode: Interface IP
ip rip metric <1-15>
Configures the route metric, which indicates the relative distance to
the destination. The default value is 1.
Command mode: Interface IP
[no] ip rip authentication
type password
Configures the authentication type. The default is none.
Command mode: Interface IP
[no] ip rip authentication
key <password>
Configures the authentication key password.
Command mode: Interface IP
ip rip enable
Enables this RIP interface.
Command mode: Interface IP
no ip rip enable
Disables this RIP interface. This is the default.
Command mode: Interface IP
show interface ip <1-250>
rip
Displays the current RIP configuration.
Command mode: All
RIP Route Redistribution configuration
The following table describes the RIP Route Redistribute commands.
Table 131 RIP Redistribute commands
Command
Description
redistribute
{fixed|static|ospf|eospf}
<1-32>
Adds selected routing maps to the RIP route redistribution list. This
option adds a route map to the route redistribution list. The routes of
the redistribution protocol matched by the route maps in the route
redistribution list will be redistributed.
Command mode: Router RIP
no redistribute
{fixed|static|ospf|eospf}
<1-32>
Removes the route map from the RIP route redistribution list.
Command mode: Router RIP
[no] redistribute
{fixed|static|ospf|eospf}
export {metric <1-15>}
Exports the routes of this protocol in which the metric and metric type
are specified. To remove a previous configuration and stop exporting
the routes of the protocol, enter none.
Command mode: Router RIP
show ip rip redistribute
Displays the current RIP route redistribute configuration.
Command mode: All