Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 123
Open Shortest Path First configuration
The following table describes the basic Open Shortest Path First (OSPF) commands. The following sections
provide more detailed information and commands.
Table 132 OSPF Configuration commands
Command
Description
router ospf
Enter Router OSPF configuration mode.
Command mode: Router OSPF
area <0-2>
Configures the OSPF area. You have to configure the additional
option for this command. For more information, see the " OSPF
Area Index configuration " section.
Command mode: Router OSPF
area-range <1-16>
Configures the summary range. You have to configure the
additional option for this command. For more information, see
the " OSPF Summary Range configuration " section.
Command mode: Router OSPF
area-virtual-link <1-3>
Configures a Virtual Link. You have to configure the additional
option for this command. For more information, see the " OSPF
Virtual Link configuration " section.
Command mode: Router OSPF
message-digest-key <1-249> md5-
key <key string>
Assigns a string to MD5 authentication key.
Command mode: Router OSPF
host <1-128>
Configures an OSPF host route. Up to 128 host routes can be
configured. Host routes are used for advertising network device
IP addresses to external networks to perform server load
balancing within OSPF. It also makes Area Border Route (ABR)
load sharing and ABR failover possible. You have to configure
the additional option for this command. For more information,
see the " OSPF Host Entry configuration " section.
Command mode: Router OSPF
lsdb-limit <0-2000>
Sets the link state database limit. The default value is 0.
Command mode: Router OSPF
[no] default-information <1-
16777214> {1|2}
Sets metric value and metric type of default route. If .the default
route is none, sets to none.
Command mode: Router OSPF
enable
Enables OSPF.
Command mode: Router OSPF
no enable
Disables OSPF. This is the default.
Command mode: Router OSPF
show ip ospf
Displays the current OSPF configuration settings.
Command mode: All