Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 142
ACL Re-Mark Update User Priority configuration
The following table describes the Update User Priority Configuration commands.
Table 164 ACL Update User Priority Configuration commands
Command
Description
[no] access-control list
<ACL number> re-mark in-
profile dot1p <0-7>
Defines 802.1p value. The value is the priority bits information in the
packet structure.
Command mode: Global configuration
[no] access-control list
<ACL number> re-mark in-
profile use-tos-precedence
Enable or disable mapping of TOS (Type of Service) priority to 802.1p
priority for In-Profile packets. When enabled, the TOS value is used to set
the 802.1p value. The default is disabled.
Command mode: Global configuration
default access-control list
<ACL number> re-mark
Resets these settings to their default values.
Command mode: Global configuration
show access-control list
<ACL number> re-mark
Displays the current ACL re-mark parameters.
Command mode: All
ACL Re-mark Out-of-Profile configuration
The following table describes the Re-mark Out-of-Profile Configuration commands.
Table 165 ACL Re-mark Out-of-Profile Configuration commands
Command
Description
[no] access-control list
<ACL number> re-mark out-
profile dscp <0-63>
Sets the DiffServ Code Point (DSCP) of Out-of-Profile packets to the
selected value.(0-63)
Command mode: Global configuration
default access-control list
<ACL number> re-mark
Resets the update DSCP parameters for Out-of-Profile packets to their
default values.
Command mode: Global configuration
show access-control list
<ACL number> re-mark
Displays the current ACL re-mark parameters.
Command mode: All
ACL Group configuration
These commands allow you to compile one or more ACLs into an ACL Group. Once you create an ACL
Group, you can assign the ACL Group to one or more ports.
The following table describes the ACL Group Configuration commands.
Table 166 ACL Group Configuration commands
Command
Description
access-control group <ACL group
number> list <ACL number>
Adds the selected ACL to the ACL Group.
Command mode: Global configuration
no access-control group <ACL group
number> list <ACL number>
Removes the selected ACL from the ACL Group.
Command mode: Global configuration
show access-control group <ACL
group number>
Displays the current ACL group parameters.
Command mode: All