Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 45
RIP user configuration
The following command displays RIP user information:
show interface ip [<1-250>] rip
Command mode: All
Current RIP Interface 2:
0.0.0.0 disabled
version 2, listen enabled, supply enabled, default none
poison disabled, split horizon enabled, trigg enabled, mcast enabled,
metric 1
auth none,key none
RIP Interface 3 : 103.1.1.1, enabled
version 2, listen enabled, supply enabled, default none
poison disabled, trigg enabled, mcast enabled, metric 1
IP information
The following command displays Layer 3 information:
show layer3 information
Command mode: All
Interface information:
1: 47.80.23.243 255.255.254.0 47.80.23.255, vlan 1, up
Default gateway information: metric strict
1: 47.80.22.1, up
2: 47.80.225.2, up
The following interface and default gateway information is displayed:
Interface number
IP address
IP mask
IP broadcast address
Status