Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 49
ACL information
The following table describes the commands used to display information about Access Control Lists and
Groups.
Table 39 ACL information commands
Command
Usage
show access-control
list <1-384>
Displays information about the selected ACL.
Command mode: All
show access-control
group <1-384>
Displays information about ACL Groups.
Command mode: All
show access-control
Displays information about all ACLs.
Command mode: All
The following command displays Access Control List information:
show access-control
Command mode: All
Current ACL information:
------------------------
Filter 1 profile:
Ethernet
- VID : 1/0xfff
Actions : Set COS to 0
Filter 2 profile:
Ethernet
- VID : 1/0xfff
Actions : Permit
No ACL groups configured.
ACL information provides configuration parameters for each Access Control List. It also shows which ACLs
are included in each ACL Group.
RMON Information
The following command displays general RMON information:
show rmon
Command mode: All
RMON history information
The following command displays RMON history information:
show rmon history
Command mode: All
RMON History group configuration:
Index IFOID Interval Rbnum Gbnum
----- ------------------------------ -------- ----- -----
1 1.3.6.1.2.1.2.2.1.1.24 30 5 5
2 1.3.6.1.2.1.2.2.1.1.24 30 5 5
3 1.3.6.1.2.1.2.2.1.1.18 30 5 5
4 1.3.6.1.2.1.2.2.1.1.19 30 5 5
5 1.3.6.1.2.1.2.2.1.1.24 1800 5 5