Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 52
Link status information
The following command displays link information:
show interface link
Command mode: All
-----------------------------------------------------------------
Port Speed Duplex Flow Ctrl Link
----- ----- -------- --TX-----RX-- ------
1 10000 full no yes up
2 10000 full yes yes disabled
3 10000 full yes yes disabled
4 10000 full yes yes disabled
5 10000 full yes yes disabled
6 10000 full yes yes disabled
7 10000 full yes yes disabled
8 10000 full yes yes disabled
9 10000 full yes yes up
10 10000 full yes yes disabled
11 10000 full yes yes disabled
12 10000 full yes yes disabled
13 10000 full yes yes disabled
14 10000 full yes yes disabled
15 10000 full yes yes disabled
16 10000 full yes yes disabled
17 any any yes yes up
18 10000 full yes yes up
19 10000 full yes yes down
20 10000 full yes yes down
21 10000 full yes yes down
Use this command to display link status information about each port on a switch, including:
Port number
Port speed (100 Mb/s, 10000 Mb/s, or any)
Duplex mode (half, full, or any)
Flow control for transmit and receive (no, yes, or any)
Link status (up , down, or disable)