Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 54
Logical Port to GEA Port mapping
The following command displays information about GEA ports:
show geaport
Command mode: All
Logical Port GEA Port(0-based) GEA Unit
------------ ----------------- ---------
1 2 0
2 4 0
3 6 0
4 8 0
5 10 0
6 12 0
7 14 0
8 16 0
9 3 0
10 5 0
11 7 0
12 9 0
13 11 0
14 13 0
15 15 0
16 17 0
17 255 0
18 18 0
19 19 0
20 0 0
21 1 0
This display correlates the logical port number to the GEA unit on which each port resides.
Fiber Port SFP status
The following command displays XFP information:
show sfp
Command mode: All
-----------------------------------------------
Port Device TX-Enable RX-Signal TX-Fault
----------- ------ --------- --------- --------
18 - XFP1 SR-XFP enabled ok N/A
19 - XFP2 SR-XFP enabled LOST N/A
20 - XFP3 SR-XFP enabled LOST N/A
21 - XFP4 FI-XFP **** NOT Installed ****
This command displays the status of the Small Form Pluggable (SFP) module on each Fiber External Port.