Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 82
Table 73 SNMP statistics
Statistics
Description
snmpProxyDrops
The total number of GetRequest-PDUs, GetNextRequest-
PDUs,GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs
delivered to the SNMP entity which were silently dropped because the
transmission of the message to a proxy target failed in a manner (other
than a time-out) such that no Response-PDU could be returned.
NTP statistics
The following command displays NTP statistics:
show ntp counters
Command mode: All
NTP statistics:
Primary Server via mgt port:
Requests Sent: 17
Responses Received: 17
Updates: 1
Secondary Server via mgt port:
Requests Sent: 0
Responses Received: 0
Updates: 0
The switch uses NTP (Network Timing Protocol) version 3 to synchronize the switch‘s internal clock with an
atomic time-calibrated NTP server. With NTP enabled, the switch can accurately update its internal clock
to be consistent with other devices on the network and generates accurate syslogs.
The following table describes the NTP statistics:
Table 74 NTP statistics
Statistics
Description
Primary Server
Requests Sent: The total number of NTP requests the switch sent to the
primary NTP server to synchronize time.
Responses Received: The total number of NTP responses received from the
primary NTP server.
Updates: The total number of times the switch updated its time based on
the NTP responses received from the primary NTP server.
Secondary Server
Requests Sent: The total number of NTP requests the switch sent to the
secondary NTP server to synchronize time.
Responses Received: The total number of NTP responses received from the
secondary NTP server.
Updates: The total number of times the switch updated its time based on
the NTP responses received from the secondary NTP server.
Last update based on
response from primary
server
Last update of time on the switch based on either primary or secondary
NTP response received.
Last update time
The time stamp showing the time when the switch was last updated.
Current system time
The switch system time when the command show ntp counters was
issued.