Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 95
SNMPv3 Community Table configuration
These commands are used for configuring the community table entry. The configured entry is stored in
the community table list in the SNMP engine. This table is used to configure community strings in the Local
Configuration Datastore (LCD) of SNMP engine.
The following table describes the SNMPv3 Community Table Configuration commands.
Table 89 SNMPv3 Community Table Configuration commands
Command
Description
snmp-server community <1-16>
index <1-32 characters>
Configures the unique index value of a row in this table. The index
can have a maximum of 32 characters.
Command mode: Global configuration
snmp-server community <1-16>
name <1-32 characters>
Defines a readable 32 character string that represents the
corresponding value of an SNMP community name in a security
model.
Command mode: Global configuration
snmp-server community <1-16>
user-name <1-32 characters>
Sets the user name, up to 32 characters.
Command mode: Global configuration
snmp-server community <1-16>
tag <1-255 characters>
Configures a tag of up to 255 characters maximum. This tag
specifies a set of transport endpoints to which a command
responder application sends an SNMP trap.
Command mode: Global configuration
no snmp-server community
<1-16>
Deletes the community table entry.
Command mode: Global configuration
show snmp-server v3
community
Displays the community table configuration.
Command mode: All
SNMPv3 Target Address Table configuration
The following table describes the SNMPv3 Target Address Table Configuration commands.
Table 90 SNMPv3 Target Address Table Configuration commands
Command
Description
snmp-server target-address
<1-16> address <transport IP
address> name <1-32
characters> {data-port|mgt-
port}
Configures the locally arbitrary, but unique identifier, target address
name associated with this entry.
Command mode: Global configuration
snmp-server target-address
<1-16> name <1-32 characters>
address <transport IP
address> {data-port|mgt-port}
Configures a transport address IP that can be used in the
generation of SNMP traps.
Command mode: Global configuration
snmp-server target-address
<1-16> port <1-65535>
Configures a transport address port that can be used in the
generation of SNMP traps.
Command mode: Global configuration
snmp-server target-address
<1-16> taglist <1-255
characters>
Configures a list of tags (up to 255 characters maximum) that are
used to select target addresses for a particular operation.
Command mode: Global configuration
snmp-server target-address
<1-16> parameters-name
<1-32 characters>
Sets the parameter name.
Command mode: Global configuration
no snmp-server target-address
<1-16>
Deletes the Target Address Table entry.
Command mode: Global configuration
show snmp-server v3 target-
address
Displays the current Target Address Table configuration.
Command mode: All