Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 96
SNMPv3 Target Parameters Table configuration
You can configure the target parameters entry and store it in the target parameters table in the SNMP
engine. This table contains parameters that are used to generate a message. The parameters include the
message processing model (for example: SNMPv3, SNMPv2c, SNMPv1), the security model (for example:
USM), the security name, and the security level (noAuthnoPriv, authNoPriv, or authPriv).
The following table describes the SNMPv3 Target Parameters Table Configuration commands.
Table 91 SNMPv3 Target Parameters Table Configuration commands
Command
Description
snmp-server target-parameters
<1-16> name <1-32 characters>
Configures the locally arbitrary, but unique identifier that is
associated with this entry.
Command mode: Global configuration
snmp-server target-parameters
<1-16> message
{snmpv1|snmpv2c|snmpv3}
Configures the message processing model that is used to generate
SNMP messages.
Command mode: Global configuration
snmp-server target-parameters
<1-16> security
{usm|snmpv1|snmpv2}
Selects the security model to be used when generating the SNMP
messages.
Command mode: Global configuration
snmp-server target-parameters
<1-16> user-name <1-32
characters>
Defines the name that identifies the user in the USM table, on
whose behalf the SNMP messages are generated using this entry.
Command mode: Global configuration
snmp-server target-parameters
<1-16> level {noAuthNo-
Priv|authNoPriv|authPriv}
Selects the level of security to be used when generating the SNMP
messages using this entry. The level noAuthNoPriv means that
the SNMP message will be sent without authentication and without
using a privacy protocol. The level authNoPriv means that the
SNMP message will be sent with authentication but without using a
privacy protocol. The authPriv means that the SNMP message
will be sent both with authentication and using a privacy protocol.
Command mode: Global configuration
no snmp-server target-
parameters <1-16>
Deletes the targetParamsTable entry.
Command mode: Global configuration
show snmp-server v3 target-
parameters
Displays the current targetParamsTable configuration.
Command mode: All
SNMPv3 Notify Table configuration
SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for
particular events or conditions, and generates Notification-Class messages based on these events or
conditions.
The following table describes the SNMPv3 Notify Table Configuration commands.
Table 92 SNMPv3 Notify Table Configuration commands
Command
Description
snmp-server notify <1-16>
name <1-32 characters>
Defines a locally arbitrary but unique identifier associated with this SNMP
notify entry.
Command mode: Global configuration
snmp-server notify <1-16>
tag <1-255 characters>
Defines a tag of 255 characters maximum that contains a tag value
which is used to select entries in the Target Address Table. Any entry in the
snmpTargetAddrTable, that matches the value of this tag, is selected.
Command mode: Global configuration
no snmp-server notify <1-
16>
Deletes the notify table entry.
Command mode: Global configuration
show snmp-server v3
notify
Displays the current notify table configuration.
Command mode: All