Command Reference Guide

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 98
User Access Control configuration
The following table describes the User Access Control commands.
Table 95 User Access Control Configuration commands
Command
Description
access user eject <user
name>
Ejects the selected user from the switch.
Command mode: Global configuration
access user user-
password <1-128
characters>
Sets the user (user) password (maximum of 128 characters). The user has
no direct responsibility for switch management. He or she can view switch
status information and statistics, but cannot make any configuration
changes.
Command mode: Global configuration
access user operator-
password <1-128
characters>
Sets the operator (oper) password (maximum of 128 characters). The
operator manages all functions of the switch. He or she can view all switch
information and statistics and can reset ports or the entire switch.
Command mode: Global configuration
access user
administrator-password
<1-128 characters>
Sets the administrator (admin) password (maximum of 128 characters).
The super user administrator has complete access to all information and
configuration commands on the switch, including the ability to change
both the user and administrator passwords.
Command mode: Global configuration
show access user
Displays the current user status.
Command mode: All except User EXEC
User ID configuration
The following table describes the User ID Configuration commands.
Table 96 User ID Configuration commands
Command
Description
access user <1-10> level
{user|operator|administrator}
Sets the Class-of-Service to define the user‘s authority level.
Command mode: Global configuration
access user <1-10> name <1-8
characters>
Defines the user name of maximum 8 characters.
Command mode: Global configuration
access user <1-10> password
Sets the user password of up to 128 characters maximum.
Command mode: Global configuration
access user <1-10> enable
Enables the user ID.
Command mode: Global configuration
no access user <1-10> enable
Disables the user ID.
Command mode: Global configuration
no access user <1-10>
Deletes the user ID.
Command mode: Global configuration
show access user
Displays the current user ID parameters.
Command mode: All except User EXEC