Handbook

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 14
Configuring SNMP trap hosts
SNMPv1 trap host
1. Configure a user with no authentication and password.
/c/sys/ssnmp/snmpv3/usm 10
name "v1trap"
(Configure user named "v1trap")
2. Configure an access group and group table entries for the user. Use the following command to
specify which traps can be received by the user:
/c/sys/ssnmp/snmpv3/access <x>/nview
/c/sys/ssnmp/snmpv3/access 10
name "v1trap"
model snmpv1
nview "iso"
/c/sys/ssnmp/snmpv3/group 10
model snmpv1
uname v1trap
gname v1trap
(Define access group to view SNMPv1 traps)
(Assign user to the access group)
In this example the user will receive the traps sent by the switch.
3. Configure an entry in the notify table.
/c/sys/ssnmp/snmpv3/notify 10
name v1trap
tag v1trap
(Assign user to the notify table)
4. Specify the IP address and other trap parameters in the Target Address (targetAddr) and Target
Parameters (targetParam) tables. Use the following command to specify the user name with this
targetParam table: c/sys/ssnmp/snmpv3/tparam <x>/uname
/c/sys/ssnmp/snmpv3/taddr 10
name v1trap
addr 47.80.23.245 -mgt
taglist v1trap
pname v1param
/c/sys/ssnmp/snmpv3/tparam 10
name v1param
mpmodel snmpv1
uname v1trap
model snmpv1
(Define an IP address to send traps)
(Specify SNMPv1 traps to send)
5. Use the community table to define the community string used in the traps.
/c/sys/ssnmp/snmpv3/comm 10
index v1trap
name public
uname v1trap
(Define the community string)