Handbook

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 28
For example:
>> # scp ad4.cfg admin@205.178.15.157:putcfg
Applying and saving configuration
Enter the apply and save commands after the command above (scp ad4.cfg 205.178.15.157:putcfg), or
use the following commands. You will be prompted for a password.
>> # scp <local_filename> <user>@<switch IP addr>:putcfg_apply
>> # scp <local_filename> <user>@<switch IP addr>:putcfg_apply_save
For example:
>> # scp ad4.cfg admin@205.178.15.157:putcfg_apply
>> # scp ad4.cfg admin@205.178.15.157:putcfg_apply_save
Note the following:
The diff command is automatically executed at the end of putcfg to notify the remote client of the
difference between the new and the current configurations.
putcfg_apply runs the apply command after the putcfg is done.
putcfg_apply_save saves the new configuration to the flash after putcfg_apply is done.
The putcfg_apply and putcfg_apply_save commands are provided because extra apply and save
commands are usually required after a putcfg.
SSH and SCP encryption of management messages
The following encryption and authentication methods are supported for SSH and SCP:
Server Host Authentication — Client RSA authenticates the switch at the beginning of every
connection
Key Exchange — RSA
Encryption — AES256-CBC, AES192-CBC, 3DES-CBC, 3DES, ARCFOUR
User Authentication — Local password authentication, RADIUS, TACACS+