Handbook

Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here. 48
Figure 5 802.1Q tagging (after port-based VLAN assignment)
In the following figure, the tagged incoming packet is assigned directly to VLAN 2 (PVID=2) because of
the tag assignment in the packet. Port 5 is configured as a tagged member of VLAN 2, and port 7 is
configured as an untagged member of VLAN 2.
Figure 6 802.1Q tag assignment
As shown in the following figure, the tagged packet remains unchanged as it leaves the switch through
port 5, which is configured as a tagged member of VLAN 2. However, the tagged packet is stripped
(untagged) as it leaves the switch through port 7, which is configured as an untagged member of VLAN
2.
Figure 7 802.1Q tagging (after 802.1Q tag assignment)
Using the /boot/conf factory command resets all ports to VLAN 1 (except port 17) and all other
settings to the factory defaults at the next reboot.