User's Manual

CHAPTER 4 NDA-24298
Page 970
Issue 1
ATDF : Assignment of Time Difference Data
ATDF: Assignment of Time Difference Data
1. General
This command is required when there is time difference within the Fusion link. The difference of time between
nodes and the UCT (Universal Coordinated Time) are written in Network Data Memory (NDM) of the Network
Control Node (NCN) by using this command.
2. Precautions
1. When SIGN = “0,” HOUR and MINUTE are not available. Therefore, if SIGN = “0,” the data is deleted.
2. For detailed information, see the NEAX2400 IPX Fusion Network System Manual.
3. Data Entry Instructions
FUSION POINT
CODE
(FCP) 1-253
SIGN OF
DIFFERENCE
TIME
(SIGN) 0-2
HOUR OF
DIFFERENCE TIME
DATA (HOUR)
00 -12
MINUTE OF
DIFFERENCE TIME
DATA (MINUTE)
00-59
REMARKS
10 1 0600
11 1 0630
FPC
Enter FPC which has Time difference.
HOUR
Enter the digits ranging from 0-12.
SIGN
0 = No Data
1 = Plus (+)
2 = Minus (-)
MINUTE
Enter the digits ranging from 0-59.