User's Manual

NDA-24298 CHAPTER 4
Page 983
Issue 1
AELGN : Allocation of EX-FCCS Telephone Number Data for NDM
3. Data Entry Instructions
Note:
Parameters marked* are required only when NEAX2400 IPX is selected in “SYSTEM” parameter.
USER
GROUP
NUMBER
(UGN)
TELEPHONE
NUMBER
(TELN)
MAX. 8 DIGITS
INPUT TYPE
(TYPE)
LENS/STN
FUSION GROUP
NUMBER
(FUG)
1-4
SYSTEM
FUG*
Enter the FUG Number the
designated station belongs.
UGN
Fixed to “1”.
Check either of the check box, allocation
of the Telephone Numbers is executed by
designating LENs or Station Number.
TYPE*
Enter the unique Telephone Number
in the whole network.
TELN
SYSTEM TYPE
(SYSTEM)
IMX/IVS
2
Check either of the check box depending
on the system type, NEAX2400 IMX
1/4/16-IMG system or NEAX2400 IVS
system.
2
FUSION
POINT
CODE
(FPC)
1-253
LINE EQUIPMENT
NUMBER
(LENS)
POINT
CODE
(PC)
1-16383
STATION
NUMBER
(STN)
MAX. 6 DIGITS
CONNECTION
FUSION
GROUP
(CON_FUG)
1-4
PC
FPC*
Enter the Fusion Point Code
of the station belongs.
TN*
Enter the Tenant Number
when “STN” is checked in
“TYPE” parameter.
LENS*
Enter the Station Number
when “STN” is checked
in “TYPE” parameter.
STN*
Fusion Group Number
connected to the Self-
FUG (display only).
CON_FUG
TENANT
NUMBER
(TN)
Enter the Point Code assigned to CCIS
Network. This parameter is required for
NEAX2000 IVS system only.
2
MG U G LV
When “LENS” is checked in the “TYPE”
parameter, enter the Line Equipment
Number of the designated station.