User's Manual

NDA-24298 CHAPTER 4
Page 273
Issue 1
ANND : Assignment of Necessary Digits Data
ANND: Assignment of Necessary Digits Data
1. General
This command assigns the necessary number of digits for a particular trunk route.
2. Precautions
1. This command is needed when the originating call uses both OG mode and signaling as follows:
(a) ASPA command SRV = 4/5 (OGC/OGCA)
(b) ARTD command OSGS = 4/6/7 (Sender Immediate Start/Sender Delay Dial Start/Sender Wink Start)
2. When the number of the digits for an originating call specified by the NND parameter is dialed, the
following occur at the same time.
(a) The SND circuit starts to transmit the number information to the external trunk route.
(b) The Originating Register (ORT) circuit is released.
3. The NND parameter assigned by this command determines the number of necessary digits to be received
by the originating register (ORT) circuit.
4. The data entered in the NND parameter should include the number of digits of the trunk access code.