User's Manual

CHAPTER 4 NDA-24298
Page 650
Issue 1
ARTI : Assignment of Trunk Application Data
37 ECCISTM
Release timer for E-CCIS Line
0 = 3 minutes (Default setting)
1 = 15 Seconds
2 = 30 Seconds
3=1 minute
4=2 minutes
5=5 minutes
6 = 10 minutes
7 = 30 minutes
8 = 30 minutes
9 = 1 hour
10-13 = Not used
14 = Immediately after call completion
15 = Not released
38 ECCISOB
OG Billing for E-CCIS Line
0 = Out of Service
1=In Service
39 ECCISIB
IC Billing for E-CCIS Line
0 = Out of Service
1=In Service
40 SPMET
Account Pulse Watch Control
Not used
41 IDRT
ID Code Specification
Not used
42 ECCISTD
Addressing Information used in E-CCIS
0 = Called DID Number
1 = Called Sub Address
43 MFCG2
MFC Outgoing Call GII
0 = Priority
1 = Non Priority
44 OPCC
Optimal Call Control
0=In Service
1 = Out of Service
45 ICTCON
ICT Control
0 = Send ALERT
1 = Send CONN
When assigning this data, always enter zero (0).
0000
46 VRD
Voice Recognize Dial
When assigning this data, always enter zero (0).
0000
47 INTD
Interface Detail
0=Q-SIG
1 = IS-11572
48 JECCIS
Common Use with E-CCIS RT
0 = Out of Service
1=In Service
CDN
ROUTE NUMBER
TRUNK DATA