User's Manual

NDA-24298 CHAPTER 4
Page 703
Issue 1
AUADN : Assignment of UCD Delayed Announcement Data for NDM
3. Data Entry Instructions
NUMBER OF
ANNOUNCEMENT
TRUNK
(CNT)
1-8
CONTROLLING
STATION
ANNOUNCEMENT
TRUNK
UGN and TELN
DLYT
Enter the delay timer value in second with a range of 0-
30 seconds. (2 seconds increments)
UGN is fixed to “1”.
Enter the TELN (NDM) of the UCD pilot station with respect to the data assigned by the ASHUN
command.
1
2
MSGT
RP
Announcement replay
0 = Once
1 = Repeat within the time specified
by the INT parameter
INT
The INT parameter appears when RP = 1.
Enter the replay interval time value in seconds with a range
of 0-30 seconds. (2 seconds increments)
Enter the Logical Route Number of the
Announcement Trunk. (Announcement Trunk
should be mounted on the same node in which the
UCD pilot station is accommodated.
CNT
LGRT
The number of external trunks
to be connected to an external
announcement machine.
DELAY
TIMER
(DLYT)
0-30
TRUNK
NUMBER
(TK)
LOGICAL
ROUTE
NUMBER
(LGRT)
MESSAGE
TIMER
(MSGT)
0-30
ANNOUNCE-
MENT
OUTPUT
REPLAY
(RP)
0/1
REPLAY
INTERVAL
(INT)
0-30
USER
GROUP
NUMBER
(UGN)
TELE-
PHONE
NUMBER
(TELN)
Enter the message timer value in seconds within 0-30 seconds.
(2 seconds increments)
However, this value is not effective if the Route data of
Announcement Trunk is assigned as follows:
ARTDN ANS = 1