User's Manual

NDA-24298 CHAPTER 4
Page 817
Issue 1
ACNDN : Assignment of Calling Number Data for NDM
ACNDN: Assignment of Calling Number Data for NDM
1. General
This command assigns the Station Number Identification (SID) sent to the ISDN for the SID To Network -
Present service/for the Calling Party Recognition service. The data assigned by this command is written in
Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Local Node
(LN).
2. Precautions
1. The CNP parameter in this command corresponds to the one assigned by the ACNPN command.
2. Do not assign the data “0” to both SKIP and ADD parameters.
3. For DC parameter, assign the same number of digits designated at ADD parameter.
4. This command must be used in a pair with ACNPN command.
3. Data Entry Instructions
CALLING
NUMBER
PATTERN
(CNP)
0-1023
NUMBER OF DIGITS OF
THE ADDITIONAL
NUMBER
(ADD)
0-24
SKIP DIGIT
(SKIP)
0-24
REMARKS
SKIP
The number of skip digits from the SID.
CNP
0 = OG ID Service
1-1023 = Calling Number Pattern
ADD
The number of the digits for the
additional number.
DIGIT CODE OF
THE ADDITIONAL
NUMBER
(DC)
MAX.24 DIGITS
DC
The SID sent to the ISDN