User's Manual

CHAPTER 4 NDA-24298
Page 878
Issue 1
AETH : Assignment of External Router Connection Routing Data for LDM
AETH: Assignment of External Router Connection Routing Data for LDM
1. General
This command is used to assign/delete routing data in case the data is transferred via external router.
2. Precautions
None.
3. Data Entry Instructions
Note:
“USE_GATE” data is automatically set and this parameter won’t appear on the MAT screen
DESTINATION
FPC
(FPC)
1-253
GATEWAY
USING FLAG
(USE_GATE)
0/1
FCCH
NUMBER
(FCHN)
1-255
CONNECTION
ROUTE
(C_RT)
1-1023
DESTINATION
IP ADDRESS
(DST_IP)
NEXT IP
ADDRESS
(NEXT_IP)
DST_IP
USE_GATE
0 = Not use the Gateway function
1 = Use the Gateway function
Note
FCHN
Enter the FCH assigned
at AFCH command.
C_RT
Enter the connection route
number of speech channel.
NEXT_IP
Enter the IP address of
FGH/IPTRK mounted on the
destination node.
The data is input in decimal
on MAT display.
Enter the IP address of FGH/IPTRK
mounted on the intermediary node.
The data is input in decimal on MAT
display.