User's Manual

CHAPTER 4 NDA-24298
Page 906
Issue 1
ASYDN : Assignment of System Data in Network Data Memory
SYSTEM
DATA
TYPE
(SYS)
SYSTEM
DATA
INDEX
(INDEX)
0 -1535
DATA
(DATA)
00 – FF
(Hex)
BIT
CORRESPONDING
DATA
SYSTEM DATA CONTENTS (MDATA)
DATA
0/1
BIT
1
000
Not used
300 Not used
4
b
0
Control of ORT all Busy Status
0/1 = ROT/Wait for Off-hook Queue
0b
1
Not used
b
2
Releasing Method for Station-to-Station Calling Service
0 0 = Calling Party release
0 1 = Called Party release
1 0 = First Party release
11=Both Party release
Normally assign “First Party release”
b
3
b
4
Temporary Class Conversion and OAI Free Location
Memory
0/1 = Not Required/Required
Note: When setting outgoing restriction and toll restric-
tion in the CCIS using the caller’s RSC transferred
by a call origination from the preceding office, data
value “1” is assigned. That destination restriction
and number restriction cannot be done using RSC.
This data is assigned “1” when the Authorization
Code, Call Waiting-Terminating, or EROW service
is provided.
b
5
PAD Control of 16LC circuit card (for Station-to-Station
Calling only)
0/1: Required/Not Required
b
6
One Burst of Ringing On Call Forwarding (C.F.) phone when
C.F. – All Calls service has been assigned (analog phones
only).
0/1 = Not Required/Required
0b
7
Not used
~ ~ ~