User's Manual

NDA-24300 CHAPTER 3
Page 87
Issue 1
SYSTEM MESSAGES
This message displays when any of the following faults are detected:
• Power failure
• Fuse blowing
• In-Frame abnormal temperature
➀
Probable cause for failure
➁
Frame in which a fault is detected
➂
Factor of failure
Reference: See Chapter 5, Section 8, for the repair procedure.
1: XX00 XXXX 0000 0000 2: 0000 0000 0000 0000 3: 0000 0000 0000 0000
➀ ➁ ➂
4: 0000 0000 0000 0000 5: 0000 0000 0000 0000 6: 0000 0000 0000 0000
7: 0000 0000 0000 0000 8: 0000 0000 0000 0000 9: 0000 0000 0000 0000
b7 b4 b3 b2 b1 b0
b7 b6 b5 b4 b3 b2 b1 b0
b7 b4 b3 b2 b1 b0
Default Alarm:
NON
6-A
System Failure
Default Grade:
3
Grade Modified:
(FIXED) NON
Lamp Modified:
(FIXED) 3
b0: Input power (-48V) down/abnormal detected
b1: PWR Supply abnormal detected
b2: PWR Supply Fuse Blown detected
b3: Abnormal temperature MJ (70ºC (158ºF))
b4: Abnormal temperature MN (60ºC (140ºF))
b0-b3: Frame No. (0 Only)
0/1 = CPU is mounted/Not mounted
b4, b5:Frame Group No.
b6, b7:Kind of frame
00 = IMG
b0: 0/1 = -/OBP Alarm 0 side
b1: 0/1 = -/OBP Alarm 1 side
b2: 0/1 = -/OBP Alarm MISC side
b3: 0/1 = -/Power Alarm 0 side
b4: 0/1 = -/Power Alarm 1 side