User's Manual

CHAPTER 8 NDA-24300
Page 534
Issue 1
CATK: Continuous Assignment of Trunk Data
[When “Delete” is selected in the “Type/KIND” selection list box]
Input Data
RT: Route Number
TK(START): First Trunk Number [1-768]
TK(END): Last Trunk Number [1-768]
STEP: Trunk Count-up Step [1-10]
Note 1
Buttons
Execute: Click to delete the input data.
Cancel: Click to cancel the deletion.
Exit: Click to exit this command.
Display Data
TK: Trunk Number
STATUS: Result of Deletion
OK=Deletion Success
Note 2
Note 1:
In the parameter here, specify the size of increment between the consecutive trunk numbers to be de-
leted. See the example below:
Example: Input data Result
TK(START)=1
TK(END)=21
STEP=2
Note 2:
When the deletion is successful, “OK” is displayed here. Otherwise (i.e. the deletion is rejected), re-
lated error message is displayed.
→
Trunk Number is deleted by 2 increments:
1357911...1921