User's Manual

CHAPTER 8 NDA-24300
Page 540
Issue 1
CCSE: Change of Common Signaling Channel Equipment
CCSE:
Change of Common Signaling Channel Equipment
1. Functional Outline
This command is used to set/reset the make busy state of CCH circuit card.
2. Parameters
CCH LENS: Line Equipment Number of CCH circuit card [5 digits]
MG=XX, UNIT=X, GROUP=XX
LINK: Link Status [0-2]
0=Link Open
1=Link Close
2=Not Available
MB: Make Busy Information [0-2]
0=Make Idle
1=Make Busy
2=Not Available
Note:
This command cannot be used for the ISDN-related circuit card (such as PRT, DCH card).