User's Manual

NDA-30122 Revision 1 Page 31
Attendant Console Statistics Operations Manual REPORT FORMATS
Attendant, Queue, Route, & Station Report Formats (Cont.)
Adding a Report
Format (Cont.)
Step 9:
From the pop-up window, highlight to select the second report statistic
type for the Statistic 2 field and press Enter. Continue the selection
through all desired remaining report statistic fields.
Step 10:
When all desired statistics have been added to the report, select None
from the statistic type pop-up window and press Enter.
Note:
The
None
option can be selected at any time when all desired statistics have been
chosen for the report. When the
None
option is selected all remaining Statistic
fields will show
None
.
Note:
This report format can be cleared at anytime by selecting the
Clear
option at the
bottom of the window. Using the
Tab
key, select the Clear option and press
Enter
.
All fields will be cleared on the Add a Report Format window.
Step 11:
Use the Tab key to select the Ok option at the bottom of the window and
press Enter to save this report format.
- If more report formats are to be added, repeat Steps 4-10
.
Step 12:
If finished with the Add a Report Format function, use the Tab key to
select the Exit option at the bottom of the window and press Enter to
return to the specific reports screen (Figure 3-3).