User's Manual

CALLED PARTY RECOGNITION SERVICE (DIRECT-IN TERMINATION (DIT))
NEAX2000 IVS
2
ISDN Features and Specifications
Page 2
NDA-24273, Issue 1.0
CALLED PARTY RECOGNITION SERVICE
(DIRECT-IN TERMINATION (DIT))
General Description
This feature provides an incoming Direct-In Termination (DIT) call via an ISDN trunk to be connected to a pre-
determined station. This application can be used for a station or modem.
Operating Procedure
No manual operation is required.
Station Application
All stations.
Service Conditions
1. For incoming calls in a Primary Rate Interface trunk, this service feature should be used only when DID
trunks are not desired.
2. Refer to the Business Features and Specifications manual for details on service conditions.