User's Manual

ISDN TERMINAL
NEAX2000 IVS
2
ISDN Features and Specifications
NDA-24273, Issue 1.0
Page 11
6. During communication via the CCIS network, the link reconnection is not available.
7. The conditions about station services are as follows:
• Station Hunting
When a Single Line Telephone/Multiline Terminal or an ISDN Terminal calls a busy Single Line
Telephone/Multiline Terminal, another Single Line Telephone/Multiline Terminal in Station Hunting
group is called.
When a Single Line Telephone/Multiline Terminal or an ISDN Terminal calls a busy ISDN Terminal,
another ISDN Terminal in Station Hunting group is called.
Note: An ISDN Terminal cannot be included in the same Station Hunting group as Single Line Telephone/
Multiline Terminals.
•CallForwarding
An ISDN Terminal cannot set Call Forwarding - All Calls/- Busy Line/-Don’t Answer, and cannot be
the destination of a Call Forwarding.
When an ISDN Terminal is a calling station, it can be forwarded to another Single Line Telephone/
Multiline Terminal but cannot be forwarded to central office trunk or tie line trunk.
•CallTransfer
A Single Line Telephone/Multiline Terminal cannot transfer a call in progress with an ISDN Terminal
to another station.
In the same way, an ISDN Terminal cannot transfer a call in progress with a Single Line Telephone/
Multiline Terminal to another station.
While a Single Line Telephone/Multiline Terminal converses with CCIS trunk and ISDN trunk, the
Single Line Telephone/Multiline Terminal cannot transfer the call to an ISDN Terminal.
• Call Pickup, Call Pickup - Designated group
An ISDN Terminal cannot be assigned to Call Pickup group and cannot pickup a call to another station.
A Single Line Telephone/Multiline Terminal cannot pickup a call to an ISDN Terminal.
• Executive Override
During voice communication between a Single Line Telephone/Multiline Terminal and an ISDN
Terminal, another Single Line Telephone/Multiline Terminal can interrupt into only Single Line
Telephone/Multiline Terminal. During data communication with an ISDN Terminal, Executive
Override is not allowed.
• Busy Service (Step Call, Call Back)
When a Single Line Telephone/Multiline Terminal calls a busy ISDN Terminal, busy service such as
Step Call and Call Back cannot be provided to the ISDN Terminal.
It is the same when an ISDN Terminal calls a busy Single Line Telephone/Multiline Terminal.
8. When a Single Line Telephone is calling an ISDN Terminal or an ISDN Terminal is busy, hooking service
is not available. Therefore, at this time other services are not available.
9. A Multiline Terminal can call an ISDN Terminal via Primary Extension or Sub Line. And a Multiline
Terminal can be called from an ISDN Terminal via Primary Extension or Sub Line.
10. When a Single Line Telephone/Multiline Terminal calls an ISDN Terminal, it can send the calling station
number to the ISDN Terminal. At this time, ISDN trunk number and local number are also attached to be
sent.
11. Station to Station Calling between an attendant console and an ISDN Terminal is not available.