NDA-24215 ISSUE 1 STOCK # 151942 ® MATWorX™ 32 User’s Guide December, 1997 NEC America, Inc.
LIABILITY DISCLAIMER NEC America, Inc. reserves the right to change the specifications, functions, or features, at any time, without notice. NEC America, Inc. has prepared this document for the exclusive use of its employees and customers. The information contained herein is the property of NEC America, Inc. and shall not be reproduced without prior written approval from NEC America, Inc. NEAX, MATWorX, DESIWorX, and Dterm are registered trademarks of NEC Corporation. Copyright 1997 NEC America, Inc.
NDA-24215 December, 1997 NEAX2000 IVS MATWorX 32 User’s Guide Table of Contents Page Chapter 1 About This Guide .................................. 1 Purpose of This Guide ................................ 1 How This Guide is Organized ..................... 1 Chapter 2 MATWorX 32 Overview ......................... 5 What’s MATWorX 32? ................................. 5 MATWorX 32 Tools ..................................... 6 Add-Ins ................................................ 6 MACH Script Editor ..
Table of Contents (Continued) Page Chapter 4 Getting Started .................................... 27 Starting MATWorX 32 ............................... Connecting to a NEAX2000 IVS PBX ....... Using the PBX Configuration Wizard . Establishing the Connection .............. Troubleshooting a Failed Connection Disconnecting from the PBX .............. Exiting MATWorX 32 ................................. Chapter 5 PBX Access Module (PAM)................. 37 What’s the PAM? ..................................
Table of Contents (Continued) Page Chapter 9 DESIWorX ............................................ 55 What’s DESIWorX?................................... Starting DESIWorX ................................... DESIWorX Online Help............................. Accessing DESIWorX Online Help .... Chapter 10 55 56 56 56 MATWorX 32 Online Help ................... 57 Online Help Features ................................ Accessing the Online Help System........... Main Help Contents ...........................
List of Figures Figure Title Figure 2-1 Figure 2-2 Figure 3-1 Figure 3-2 Figure 3-3 Figure 3-4 Figure 3-5 Figure 3-6 Figure 3-7 Figure 3-8 Figure 3-9 Figure 3-10 Figure 4-1 Figure 4-2 Figure 4-3 Figure 4-4 Figure 4-5 Figure 4-6 Figure 4-7 Figure 5-1 Figure 5-2 Figure 6-1 Figure 6-2 Figure 6-3 Figure 6-4 Figure 6-5 Figure 6-6 Figure 6-7 Figure 6-8 Figure 6-9 Figure 7-1 Figure 8-1 Figure 9-1 Figure C-1 MATWorX 32 Taskbar ............................9 Print Preview Dialog .............................
List of Tables Figure Title Table 3-1 System Requirements ........................... 19 MATWorX 32 User’s Guide NDA-24215 Revision 1.
About This Guide Chapter 1 About This Guide Purpose of This Guide This user guide contains useful information that will help you successfully install and use the MATWorX 32 program. Included are highlights about many key features of the program including the MATWorX 32 Taskbar, PBX Access Module (PAM), Add-Ins, PBX Configuration Wizard, MACH Script Editor, Scheduler, DESIWorX, Extended Command Set, Error Codes, and the Online Help System.
About This Guide Page 2 ◆ PBX Access Module (PAM) describes the process of how MATWorX 32 applications communicate with the PBX via the PAM. The PAM is a gateway for 32-bit Microsoft Windows applications to connect to the NEAX2000 IVS PBX. ◆ Add-Ins describes the concept of Add-Ins, including what they are and how they work, as well as how to add and remove them. Add-Ins are the basic tools of MATWorX 32.
About This Guide ◆ MATWorX 32 Online Help describes the online Help system in detail as well as how to access it and print Help topics. ◆ Appendix A lists the Extended Command Set that you can use in conjunction with the MACH Script Editor window. The Extended Command Set characters are modifiers you type in front of a NEAX2000 IVS command on the MACH Script Editor window. Using Extended Commands can greatly reduce the number of commands needed to perform certain tasks.
About This Guide This page is for your notes. Page 4 MATWorX 32 User’s Guide NDA-24215 Revision 1.
MATWorX 32 Overview Chapter 2 MATWorX 32 Overview In this chapter you learn about the following: ◆ What’s MATWorX 32? ◆ MATWorX 32 Tools ◆ MATWorX 32 Applications ◆ Introduction to Working in Windows 95 ◆ Navigating through the MATWorX 32 Taskbar ◆ Working with MATWorX 32 dialogs and buttons ◆ Printing a report What’s MATWorX 32? MATWorX 32 is a 32-bit Windows-based software application that enables you to program and maintain an unlimited number of NEAX2000 IVS PBXs via your computer.
MATWorX 32 Overview MATWorX 32 Tools There are three kinds of tools included in the MATWorX 32 program: Add-Ins, MACH Script Editor, and a PBX Configuration Wizard. These tools are accessible from the Taskbar. Add-Ins Add-Ins are the basic tools of MATWorX 32. Each one provides you with specialized capabilities to program PBX features and functions. MATWorX 32 comes with more than a dozen Add-Ins that can be accessed from the Taskbar.
MATWorX 32 Overview MATWorX 32 Applications MATWorX 32 software includes three separate applications that can run independently from one another. However, when used in conjunction with MATWorX 32 or each other, these applications provide a robust suite of PBX maintenance applications. PBX Access Module (PAM) The PAM acts as a gateway between MATWorX 32 tools and connected NEAX2000 IVS PBXs. It provides connection and communication links for programming the PBX.
MATWorX 32 Overview Introduction to Working in Windows 95 If you are new to working in Windows 95 or would like a refresher on Windows terminology, functions, and navigational procedures, take a minute to access the Microsoft Windows Tutorial Tour by following the steps below. 1. Launch Microsoft Windows 95 on your computer. 2. Select Help from the Start taskbar. 3. Select Tour: Ten Minutes to Using Windows under the Contents tab. 4. Follow the instructions on your screen.
MATWorX 32 Overview Note: Some menu items (Add-In Manager, Help Contents F1, and About MATWorX 32) do not have a corresponding button. These items are accessible only from the pull-down menus. Figure 2-1 MATWorX 32 Taskbar PBX Menu Connect - Select this menu item to access the Connection to PBX dialog where you can select a PBX from a list of available PBXs and connect to it. You can also click the Connect to PBX button to select a PBX from a list of available PBXs and connect to it.
MATWorX 32 Overview Station Menu The Station Menu is a dynamic menu that contains station-related Add-Ins. For information about a particular Station Add-In, access the online Help for that Add-In. You can also click the Station Tool Palette button to display a floating palette of buttons that can launch station-related Add-Ins. Number Plan Menu The Number Plan Menu is a dynamic menu that contains number plan-related Add-Ins.
MATWorX 32 Overview You can also click the Features Tool Palette button to display a floating palette of buttons that can launch feature-related Add-Ins. Add-Ins Menu Add-In Manager - Select this menu item to access the Add-Ins Manager dialog where you can add and remove Add-Ins to/from the MATWorX 32 Taskbar. Refer to Chapter 6 “Add-Ins” for more information. Active Add-Ins - Select this menu item to display a sub-menu that lists all currently active Add-Ins.
MATWorX 32 Overview DESIWorX - Select this menu item to access the DESIWorX dialog where you can create and print function key labels for your Dterm stations. The labels are saved in a database and can be modified and printed when necessary. Refer to Chapter 9 “DESIWorX” for more information. You can also click the DESIWorX button to access the DESIWorX dialog.
MATWorX 32 Overview Command Manual - Select this menu item to launch Adobe Acrobat Reader (included with MATWorX 32) and automatically open the NEAX2000 IVS Command Manual. You can also click the Acrobat Reader button to launch Adobe Acrobat Reader and automatically display a menu where you can select and open the MATWorX 32 User’s Guide, NEAX2000 IVS Command Manual, Help on Using Acrobat Reader, and NEC’s Copyright Notice.
MATWorX 32 Overview Clicking the What’s This? button enables you to click on a field or button in a dialog to display What’s This Help for the item. Clicking the OK button saves changes and closes the dialog. Clicking the Lookup Data button replaces the listed data with the most current data contained in the PBX. Clicking the Cancel Data button stops the lookup process. Data replaced during the lookup process will remain changed. Clicking the Update Data button saves the changes on the dialog to the PBX.
MATWorX 32 Overview Clicking the Export button on the Print Preview dialog enables you to save and export the displayed report to a file. Clicking the Email button on the Print Preview dialog enables you to email the report directly from MATWorX 32 if your email system supports MAPI. Clicking the Delete Data button clears the displayed data on the dialog. It does not clear the data from the PBX. Clicking the Add button enables you to add an Add-In to the MATWorX 32 Taskbar.
MATWorX 32 Overview Clicking the Reset PBX button resets the PBX. A PBX reset is required before an update can take effect. Note, if you reset the PBX, all existing call connections will end. Also, if you are connected to the PBX through a direct connection, your connection will be lost, but will be automatically reconnected. Clicking the Close button disregards any changes not already sent to the PBX and closes the dialog. Clicking the PBX Configuration Wizard button launches the wizard.
MATWorX 32 Overview Printing a Report The MACH Script Editor, Scheduler, and several AddIns enable you to print reports and listup data by clicking the Print Data button. The Print Preview dialog (Figure 2-2) automatically displays so you can preview the report before printing. Figure 2-2 Print Preview Dialog You can use the Print Preview dialog to: ◆ Print the displayed report by clicking the Print Data button. ◆ Zoom in and out on the report by clicking the Zoom button.
MATWorX 32 Overview This page is for your notes. Page 18 MATWorX 32 User’s Guide NDA-24215 Revision 1.
Installing MATWorX 32 Chapter 3 Installing MATWorX 32 In this chapter you learn about the following: ◆ MATWorX 32 hardware and software “system” requirements ◆ MATWorX 32 installation instructions for Windows 95 and NT 4.0 or higher System Requirements MATWorX 32 requires an IBM or compatible PC running Microsoft Windows 95 or NT 4.0 or higher and a NEAX2000 IVS PBX with 1000 series software or higher.
Installing MATWorX 32 MATWorX 32 Installation Instructions To install MATWorX 32 for the first time, or to return to Setup later to add optional features or Help files you didn’t install the first time, you must use the installation CD included in your MATWorX 32 package. You must run Setup from Windows. Important: Be sure to close all Windows programs and screen savers that are running and disable any virus detection programs before using the Setup program.
Installing MATWorX 32 3. Select Run from the Start taskbar. A dialog similar to the following displays (Figure 3-1). Figure 3-1 Run Dialog 4. Type D:\Setup in the Open text box and click OK. The MATWorX Install dialog displays (Figure 3-2). Figure 3-2 MATWorX Install Dialog MATWorX 32 User’s Guide NDA-24215 Revision 1.
Installing MATWorX 32 5. Click Next. The Welcome dialog displays (Figure 3-3). Figure 3-3 Welcome Dialog 6. Read the information in the Welcome dialog, then click Next. The Software License Agreement dialog displays (Figure 3-4). Figure 3-4 Software License Agreement Page 22 MATWorX 32 User’s Guide NDA-24215 Revision 1.
Installing MATWorX 32 7. Read the information in the Software License Agreement dialog, then click Yes to accept the terms of the license agreement. The Readme Information dialog displays (Figure 3-5). Figure 3-5 Readme Information Dialog 8. Read the information in the Readme Information dialog, then click Next. The Choose Destination Location dialog displays (Figure 3-6). Figure 3-6 Choose Destination Location Dialog MATWorX 32 User’s Guide NDA-24215 Revision 1.
Installing MATWorX 32 9. To accept the default destination directory, click Next. To change it, click Browse and select the desired directory, click OK, and then click Next. The Select Program Folder dialog displays (Figure 3-7). Figure 3-7 Select Program Folder Dialog 10. To accept the default program folder, click Next. To change it, select an existing folder or type a new name in the edit box, then click Next.
Installing MATWorX 32 11. To accept the settings and begin copying files to your hard disk, click Next. To change any setting, click Back to go backwards through the installation until the desired dialog displays. Then make the necessary adjustment(s) and click Next until the Setup program begins copying files to your hard disk. The Setup Progress windows display (Figure 3-9), indicating the progress of the Setup program and the level of resources available on your computer.
Installing MATWorX 32 This page is for your notes. Page 26 MATWorX 32 User’s Guide NDA-24215 Revision 1.
Getting Started Chapter 4 Getting Started In this chapter you learn about the following: ◆ Starting MATWorX 32 ◆ Connecting to a NEAX2000 IVS PBX ◆ Exiting MATWorX 32 Starting MATWorX 32 This procedure explains how to launch MATWorX 32 each time you want to run the program. Note: Before you can use MATWorX 32 to program a NEAX2000 IVS, you must configure a communication link between your PC and the PBX. Refer to “Connecting to a NEAX2000 IVS PBX” on page 29. 1.
Getting Started 3. If you are launching MATWorX 32, DESIWorX 32, or Scheduler 32 for the first time, the User Information dialog displays (Figure 4-2). Figure 4-2 User Information Dialog 4. Enter your Name, Company, and Product Serial Number in the appropriate text boxes, then click Next. The MATWorX 32 Taskbar displays (Figure 4-3). Figure 4-3 MATWorX 32 Taskbar You have now successfully started MATWorX 32. Page 28 MATWorX 32 User’s Guide NDA-24215 Revision 1.
Getting Started Connecting to a NEAX2000 IVS PBX Note: For the best performance using MATWorX 32, establish a direct communication connection from your computer to the PBX at 9600 baud. If you must use a modem connection, connect at 2400 baud. Using the PBX Configuration Wizard The PBX Configuration Wizard enables you to establish the proper communication settings between your computer and the NEAX2000 IVS.
Getting Started 2. Select Configuration Wizard from the Applications menu, or click the Configuration Wizard button. The PBX Configuration Wizard dialog displays (Figure 4-4). Figure 4-4 PBX Configuration Wizard Dialog 3. Follow the instructions on your screen. Help is available for each dialog in the Wizard by clicking the Help button. Establishing the Connection Once you have established the communication settings between your computer and a NEAX2000 IVS, you can connect to it using MATWorX 32. 1.
Getting Started 3. Select the PBX that you want to connect to. Click the down arrow to view all available PBXs. 4. Click the OK button. You have now successfully connected MATWorX 32 to the PBX. Troubleshooting a Failed Connection The following bulleted list provides possible reasons for a failed connection between your computer and the PBX, as well as the action required to correct the problem. ◆ Have you created a hardware link between your PC and the PBX? Yes - Go to the next bullet item.
Getting Started Page 32 ◆ Have you entered configuration information for your PBX? Yes - Go to the next bullet item. No - Run the PBX Configuration Wizard to establish the proper communication settings between your computer and the PBX. I don’t understand the question - Once the hardware link is established, configuration information is necessary for the PC to connect to the PBX. For example, to dial the PBX, your PC must know the PBX's phone number.
Getting Started Modem Connection ☞ No Dial Tone Action: Listen to the modem while it dials to determine that no dial tone was present.
Getting Started ✓ PBX power is off ✓ A valid station number is not assigned to the built-in PBX modem ☞ Busy Signal Action: Listen to the modem while it dials to determine that a busy signal is received. Reasons: ✓ Incorrect phone number ✓ PBX modem is being accessed by another user ☞ Ring and Answer, but no connect message Action: Listen to the modem while it dials to determine that the PBX answered. Watch for a Connect message.
Getting Started Disconnecting from the PBX This procedure explains how to disconnect from a PBX when you are finished working with it. 1. Click the Disconnect button on the MATWorX 32 Taskbar. The Disconnect from PBX dialog displays (Figure 4-6). Figure 4-6 Disconnect from PBX Dialog 2. Click the OK button. MATWorX 32 disconnects from the PBX. Exiting MATWorX 32 This procedure explains how to exit MATWorX 32 when you are finished working in the program.
Getting Started This page is for your notes. Page 36 MATWorX 32 User’s Guide NDA-24215 Revision 1.
PBX Access Module (PAM) Chapter 5 PBX Access Module (PAM) In this chapter you learn about the following: ◆ What’s the PAM? ◆ PAM Communication Overview ◆ PAM Online Help What’s the PAM? The PAM (Figure 5-1) is an application that acts as a gateway between MATWorX 32 tools and a NEAX2000 IVS PBX. It provides connection and communication links for programming the PBX. When you start MATWorX 32, the PAM automatically starts.
PBX Access Module (PAM) You can use the PAM to: ◆ Modify a dial-up profile (PBX configuration) for each PBX you access. Use the PBX Configuration Wizard to create dial-up profile. ◆ Connect to and disconnect from available PBXs. However, when using MATWorX 32 the recommended way to do this is with the PBX Connect and PBX Disconnect buttons on the MATWorX 32 Taskbar. ◆ View a real-time log of the transactions between the PAM and the PBX. ◆ Send any of the NEAX2000 IVS PBX commands to the PBX.
PBX Access Module (PAM) Figure 5-2 represents the communication flow between MATWorX 32 tools, the PAM, and the PBX. Figure 5-2 PAM Communication Flow PAM Online Help The PAM application contains its own contextsensitive online Help system. This guide provides a simple overview to the features and capabilities of the PAM. For more detailed information, including procedures and detailed descriptions, access the PAM online Help system. MATWorX 32 User’s Guide NDA-24215 Revision 1.
PBX Access Module (PAM) Accessing PAM Online Help There are several ways to access and use the PAM online Help system. ◆ To access the main Help contents, select Help Contents F1 from the Help menu on the PAM menu bar. You can also access the main Help contents by selecting Programs / MATWorX 32 / PAM Help from the Start taskbar. ◆ To display Help for the current PAM dialog, press F1.
Add-Ins Chapter 6 Add-Ins In this chapter you learn about the following: ◆ What’s an Add-In? ◆ Four categories of Add-Ins ◆ Installing an Add-In ◆ Starting an Add-In? ◆ Removing an Add-In ◆ Add-In Online Help What’s an Add-In? Add-Ins are the basic tools of MATWorX 32. Each one acts like a separate application by providing you with specialized capabilities to program PBX features and functions.
Add-Ins Four Categories of Add-Ins Features Feature Add-Ins (Figure 6-1) simplify PBX return values by translating them from an encrypted code into a meaningful message. Software ID and Display Issue are two examples of this type of Add-In. Figure 6-1 Feature Add-Ins Enhanced Features Enhanced Feature Add-Ins (Figure 6-2) use one or more related commands to setup a specific task or feature within the PBX. For example, the Caller ID Add-In uses multiple commands such as command 30, 09, 05, 06, 08, etc.
Add-Ins Commands Command Add-Ins (Figure 6-3) enable you to setup data within the PBX for one particular command. For example, Trunk Data and Trunk Route Add-Ins represent commands 30 and 35, respectively. Figure 6-3 Command Add-Ins Wizards Wizard Add-Ins (Figure 6-4) provide a simple way to perform difficult tasks by walking you through a series of questions in an automated process. The answers are then used by the program to perform the task.
Add-Ins Installing an Add-In The following procedure explains how to install an existing Add-In to the MATWorX 32 program so you can access it from the Taskbar. By default, all Add-Ins are installed and accessible from the Taskbar. Unless you remove an Add-In, you will not need to perform this procedure. 1. Access the MATWorX 32 Taskbar. 2. From the Add-Ins menu, select Add-In Manager. The Add-Ins Manager dialog displays (Figure 6-5). Figure 6-5 Add-Ins Manager Dialog 3. Click the Add button.
Add-Ins 4. Select the Add-In you want to install and click Open. The Notice dialog displays (Figure 6-7) informing you that the Add-In has been successfully registered (installed). Figure 6-7 Add-In Installed Dialog 5. Click OK. The Add-Ins Manager dialog redisplays with the Add-In included in the list of current Add-In modules. Notice that the Add-In also appears under the appropriate menu item and tool palette (button) on the Taskbar. You have now successfully installed an Add-In.
Add-Ins 2. From the Add-Ins menu, select Add-In Manager. The Add-Ins Manager dialog displays (Figure 6-8). Figure 6-8 Add-Ins Manager Dialog 3. Select the Add-In module you want to remove and click the Remove button. The Notice dialog displays (Figure 6-9) informing you that the AddIn has been successfully removed. Figure 6-9 Add-In Removed Dialog 4. Click OK. The Add-Ins Manager dialog redisplays with the Add-In removed from the list of current Add-In modules.
Add-Ins Add-In Online Help This guide provides a simple overview to the features and capabilities of Add-Ins. For more detailed information, including procedures and descriptions, access the online Help for each individual Add-In. Help for Add-In dialogs is included in the MATWorX 32 online Help system. Refer to Chapter 10 “MATWorX 32 Online Help” for features and ways to access and print Help topics. MATWorX 32 User’s Guide NDA-24215 Revision 1.
Add-Ins This page is for your notes. Page 48 MATWorX 32 User’s Guide NDA-24215 Revision 1.
MACH Script Editor Chapter 7 MACH Script Editor In this chapter you learn about the following: ◆ What’s the MACH Script Editor? ◆ Starting the MACH Script Editor ◆ MACH Script Editor Online Help What’s the MACH Script Editor? The MOC Accelerated Command Heap (MACH) dialog (Figure 7-1) is a powerful time-saving tool that is integrated into MATWorX 32.
MACH Script Editor Starting the MACH Script Editor The following procedure explains how to access and run the MACH Script Editor from MATWorX 32. 1. Access the MATWorX 32 Taskbar. 2. From the Applications menu, select MACH Script Editor, or click the MACH Script Editor button on the button bar. You have now successfully launched the MACH Script Editor dialog. MACH Script Editor Online Help This guide provides a simple overview to the features and capabilities of the MACH Script Editor.
Scheduler Chapter 8 Scheduler In this chapter you learn about the following: ◆ What’s a Scheduler? ◆ Starting the Scheduler ◆ Scheduler Online Help What’s a Scheduler? The Scheduler (Figure 8-1) is a versatile application that can be used stand-alone or in conjunction with the MACH Script Editor. You can build and schedule scripts (series of MOC commands) all within the Scheduler, or you can build the scripts using the MACH Script Editor and then schedule them to run using the Scheduler.
Scheduler You can use the Scheduler to: ◆ Create MOC command scripts. ◆ Delete a script. ◆ Login to the PBX. ◆ Schedule a script to run. ◆ Schedule PBX system backups. ◆ View the results of a script. ◆ Print a script. Starting the Scheduler The following procedure explains how to access and run the Scheduler from MATWorX 32. Note: You can also start the Scheduler by selecting Programs / MATWorX 32 / Scheduler from the Start taskbar in Windows. 1. Access the MATWorX 32 Taskbar. 2.
Scheduler Accessing Scheduler Online Help There are several ways to access and use the Scheduler online Help system. ◆ To access the main Help contents, select Help Contents F1 from the Help menu on the Scheduler menu bar. You can also access the main Help contents by selecting Programs / MATWorX 32 / Scheduler Help from the Start taskbar. ◆ To display Help for the current Scheduler dialog, press F1.
Scheduler This page is for your notes. Page 54 MATWorX 32 User’s Guide NDA-24215 Revision 1.
DESIWorX Chapter 9 DESIWorX In this chapter you learn about the following: ◆ What’s DESIWorX? ◆ Starting DESIWorX ◆ DESIWorX Online Help What’s DESIWorX? DESIWorX (Figure 9-1) is a unique application that enables you to create and print function key labels for the Dterm stations on your NEAX2000 IVS. The labels are saved in a database and can be modified and printed when necessary. Figure 9-1 DESIWorX Dialog You can use the DESIWorX to: ◆ Create a label database, including label design.
DESIWorX Starting DESIWorX The following procedure explains how to access and run DESIWorX from MATWorX 32. Note: You can also start DESIWorX by selecting Programs / MATWorX 32 / DESI32 from the Start taskbar in Windows. 1. Access the MATWorX 32 Taskbar. 2. From the Applications menu, select DESIWorX, or click the DESIWorX button on the button bar. You have now successfully launched the DESIWorX application.
MATWorX 32 Online Help Chapter 10 MATWorX 32 Online Help In this chapter you learn about the following: ◆ Features of the MATWorX 32 online Help system ◆ Accessing the online Help system ◆ Printing Help topics Online Help Features Within the online Help system, you will find a wealth of useful information pertaining to the MATWorX 32 program and its tools (Add-Ins, MACH Script Editor, and PBX Configuration Wizard).
MATWorX 32 Online Help Main Help Contents To access the main Help contents, select Help Contents F1 from the Help menu on the MATWorX 32 Taskbar. You can also access the main Help contents by selecting Programs / MATWorX 32 / MATWorX 32 Help from the Start taskbar. Dialog-level Help To display Help for the current MATWorX 32 dialog, press F1. What’s This? Help What’s This? Help is a means to display pop-up information about a particular field or button within a dialog.
MATWorX 32 Online Help Printing Help Topics 1. Access the Help topic you want to print. 2. Click the Print button or select Print Topic from the File menu. The Print dialog displays. 3. Click OK. Tip: You can use your right mouse button to click inside the Help window, then click Print Topic. This also works for printing the contents of a pop-up window. MATWorX 32 User’s Guide NDA-24215 Revision 1.
MATWorX 32 Online Help This page is for your notes. Page 60 MATWorX 32 User’s Guide NDA-24215 Revision 1.
Extended Command Set Appendix A Extended Command Set The Extended Command Set is a set of custom commands that can be used in the MACH Script Editor. These extended commands provide enhanced functionality to many of the existing NEAX2000 IVS Commands. The purpose of the extended commands is to enable you to quickly and easily perform complicated tasks within a script by reducing the number of commands you need to use.
Extended Command Set @20X (where X represents the Numbering Plan Group 0 - 3) Finds the Access Codes assigned to the Feature Code displayed in the First Data field. The first returned Access Code is displayed in the SD field. Additional Access Codes are displayed in the ED field. Page 62 ^90 Copies the Programmable Key assignments from the station in the First Data field to the station in the Second Data field. @980 Determines whether an Add-On exists for the station in the First Data field.
Extended Command Set LX (where X represents any command from the NEAX2000 IVS Command Set) Performs a lookup and listing of all Second Data. (For example, L10 retrieves all LEN assignments.) This Extended Command cannot be used with any other Extended Commands in a script; it must be the only command line in a script. LFX (where X represents any command from the NEAX2000 IVS Command Set) Performs a filtered lookup and listing of all existing Second Data.
Extended Command Set This page is for your notes. Page 64 MATWorX 32 User’s Guide NDA-24215 Revision 1.
Error Codes Appendix B Error Codes The following error codes are generated by MATWorX 32 and displayed in the Error text box on the MATWorX 32 Taskbar. These messages indicate processing errors generated in the PBX or the PAM while performing tasks within MATWorX 32. All error codes contain five digits, the first two beginning with 10. The remaining three digits are divided into four series beginning with 100, 200, 300, or 400.
Error Codes File Error (Error 10110) Read Header Error (Error 10111) Write Header Error (Error 10112) Data Not Found (Error 10113) Wait Busy Now (Error 10114) Verify Failed (Error 10115) Load Failed (Error 10116) Code Not Used (Error 10117) Assigned Already (Error 10118) Invalid Area Number (Error 10119) PBX Error (Error 10120) PBX Busy (Error 10121) Handshake Time Out (Error 10122) PBX Initialize Error (Error 10123) Hardware Error (Error 10124) Wrong Error (Error 10125) Not Assigned (Error 10126) Listup N
Error Codes Digit Error (Error 10206) Time Out (Error 10207) Checksum Error (Error 10208) No File Defined (Error 10209) File Error (Error 10210) Read Header Error (Error 10211) Write Header Error (Error 10212) Data Not Found (Error 10213) Wait Busy Now (Error 10214) Verify Failed (Error 10215) Load Failed (Error 10216) Code Not Used (Error 10217) Assigned Already (Error 10218) Invalid Area Number (Error 10219) PBX Error (Error 10220) PBX Busy (Error 10221) Handshake Time Out (Error 10222) PBX Initialize Er
Error Codes Failed to Connect (Error 10304) Data Error (Error 10305) Digit Error (Error 10306) Time Out (Error 10307) Checksum Error (Error 10308) No File Defined (Error 10309) File Error (Error 10310) Read Header Error (Error 10311) Write Header Error (Error 10312) Data Not Found (Error 10313) Wait Busy Now (Error 10314) Verify Failed (Error 10315) Load Failed (Error 10316) Code Not Used (Error 10317) Assigned Already (Error 10318) Invalid Area Number (Error 10319) PBX Error (Error 10320) PBX Busy (Error
Error Codes Series 400 Error Codes No Error (Message 10400) Object Not Registered (Error 10401) Port Not Open (Error 10402) Port Not Selected (Error 10403) Failed To Connect (Error 10404) Data Error (Error 10405) Digit Error (Error 10406) Time Out (Error 10407) Checksum Error (Error 10408) No File Defined (Error 10409) File Error (Error 10410) Read Header Error (Error 10411) Write Header Error (Error 10412) Data Not Found (Error 10413) Wait Busy Now (Error 10414) Verify Failed (Error 10415) Load Failed (Er
Error Codes Listup Not Supported (Error 10440) Indicates you tried to use a command to listup data, and the command is not used by MATWorX 32 to generate listup data or the command being used is not supported by the connected PBX. User Cancelled (Error 10450) Page 70 MATWorX 32 User’s Guide NDA-24215 Revision 1.
Directory and File Structure Appendix C Directory and File Structure Appendix C provides information about the directory structure, files, and file locations of the MATWorX 32 suite of applications installed on your computer. Note: If you changed the destination directory or program folder name during the installation process, the information below may be different on your machine. MATWorX 32 and related applications use many different files.
Directory and File Structure The following list represents the directories and related subdirectories included in the MATWorX 32 suite of applications. Caution: Do not rename any of the MATWorX 32 files, subdirectories, or directories once they have been installed on your computer.
Directory and File Structure Pam - where PAM program files are located Reports - where report templates are located SETWorX - where Scheduler program files are located Userdat - where database files are located MATWorX 32 User’s Guide NDA-24215 Revision 1.
Directory and File Structure This page is for your notes. Page 74 MATWorX 32 User’s Guide NDA-24215 Revision 1.
