Datasheet
NEC Confidential
46
NEC Internal Use Only
5. Functions <Pool 4>
(2-3) Configuring Logical Disks
• The maximum number of logical disk is 1024 per 1 dynamic pool.
• The minimum capacity of logical disk for configuration is 1GB.
• The unit of logical disk for configuration is 1GB.
• The maximum size of a logical disk which can be used as a snapshot volume is 10TB.
• DDR and MV can be created up to 10TB.
• The logical disks can be used immediately after they are configured. (Quick LUN configuration
function) Formatting of logical disks is run in the background.
(2-4) Expanding Logical Disk Capacity Function
• Expansion can be executed on line during operation.
• Logical disk capacity can be expanded with retention of the existing data.
• When expanding a logical disk, unused space in the same pool is available for the expansion.
Note: The unused space must exist in a pool in which logical disks belong.
• After increasing capacity, the space, including any additional space, is available for use.
Note: The procedure for adding space vary depending on the server OS. Reboot may be required
depending on the OS.
OS Procedure
Windows Server 2003/2008 Extended volume is recognized with “diskpart” command
Linux
The file system can not be expanded when expanding a logical disk. Do the
following procedures;
a) Back up the contents of a logical disk to media such as a tape, etc.
b) Expand the logical disk.
c) Rebuild the file system in the expanded logical disk.
Note: The data in the logical disk is deleted.
d) Restore the data from backup media such as a tape in the rebuilt file system.
You can configure logical disks by allocating the required amount from the unused space in the
dynamic pool.