Operation Manual

112
7. Maintenance
5. Connect the supplied power cable, turn on the Main Power switch and turn on the projector.
6. Finally, select the menu
→ [Reset] → [Clear Lamp Hours] to reset the lamp life remaining and lamp usage
hours.
NOTE: When the lamp exceeds 2100 hours (up to 3100 hours in Eco mode) of service, the projector cannot turn on and the menu is
not displayed.
If this happens, press the HELP button on the remote control for 10 seconds to reset the lamp clock back to zero.
When the lamp time clock is reset to zero, the LAMP indicator goes out.
4. Reattach the lamp cover.
Slip the lamp cover back until it snaps into place.
PC CARD
LAMP
STATUS
POWER
ON/STAND BY
E
PC CARD
LAMP
STATUS
POWER
ON/STAND BY
E
1
2
PC CARD
LAMP
STATUS
POWER
ON/STAND BY
CE
PC CARD
LAMP
STATUS
POWER
ON/STAND BY
CE