Operation Manual
Table Of Contents
- INDEX
- Front cover
- Important Information
- Table of Contents
- 1. Introduction
- 2. Installation and Connections
- 3. Projecting an Image (Basic Operation)
- 4. Convenient Features
- (1) Turning Off the Image and Sound
- (2) Freezing a Picture
- (3) Enlarging and Moving a Picture
- (4) Changing Lamp Mode
- (5) Getting Integrated Help
- (6) Using a USB Mouse
- (7) Using the Optional Remote Mouse Receiver (NP01MR)
- (8) Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]
- (9) Displaying Two Pictures at the Same Time
- (10) Preventing Unauthorized Use of the Projector
- (11) Limiting Access Level to Available Menu Items
- (12) Operation Using an HTTP Browser
- (13) Projecting Your Computer’s Screen Image from the Projector via a Network [NETWORK PROJECTOR]
- (14) Using the Projector to Operate Your Computer via a Network [REMOTE DESKTOP]
- 5. Using the Viewer
- 6. Using On-Screen Menu
- 7. Maintenance
- 8. Using Optional Lenses
- 9. Appendix
- (1) Troubleshooting
- (2) Specifications
- (3) Cabinet Dimensions
- (4) Screen Size and Projection Distance
- (5) Pin Assignments of D-Sub COMPUTER 1 Input Connector
- (6) Compatible Input Signal List
- (7) PC Control Codes and Cable Connection
- (8) Removing and Attaching the USB Wireless LAN Unit
- (9) Troubleshooting Check List
- (10) TravelCare Guide
91
6. Using On-Screen Menu
Selecting Cornerstone Mode [CORNERSTONE]
This option allows you to correct trapezoidal distortion.
Selecting this item will display the Cornerstone adjustment screen. (
→
page 40)
NOTE: The [CORNERSTONE] item is not available when [KEYSTONE] or [GEOMETRIC CORRECTION] is selected.
Using the PIP/SIDE BY SIDE Function [PIP/SIDE BY SIDE]
This function allows you to view two different signals simultaneously. (
→
page 43)
MODE:
This option allows you to select two modes: PIP and SIDE BY SIDE.
PIP: This option allows you to view a sub picture in the main picture.
SIDE BY SIDE: This allows you to view two pictures side by side.
POSITION:
When [PIP] is selected for [MODE], this option allows you to select the position of a sub picture in the main pic-
ture.
The options are: top-left, top-right, bottom left, and bottom right.
NOTE: The [POSITION] cannot be selected when [SIDE BY SIDE] is selected.
SOURCE:
This option allows you to select a sub picture signal.
The options are: Off, VIDEO and S-VIDEO.
Selecting [OFF] will cancel the PIP/SIDE BY SIDE mode and return to the normal screen.