Operation Manual
Table Of Contents
- INDEX
- Front cover
- Important Information
- Table of Contents
- 1. Introduction
- 2. Installation and Connections
- 3. Projecting an Image (Basic Operation)
- 4. Convenient Features
- (1) Turning Off the Image and Sound
- (2) Freezing a Picture
- (3) Enlarging and Moving a Picture
- (4) Changing Lamp Mode
- (5) Getting Integrated Help
- (6) Using a USB Mouse
- (7) Using the Optional Remote Mouse Receiver (NP01MR)
- (8) Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]
- (9) Displaying Two Pictures at the Same Time
- (10) Preventing Unauthorized Use of the Projector
- (11) Limiting Access Level to Available Menu Items
- (12) Operation Using an HTTP Browser
- (13) Projecting Your Computer’s Screen Image from the Projector via a Network [NETWORK PROJECTOR]
- (14) Using the Projector to Operate Your Computer via a Network [REMOTE DESKTOP]
- 5. Using the Viewer
- 6. Using On-Screen Menu
- 7. Maintenance
- 8. Using Optional Lenses
- 9. Appendix
- (1) Troubleshooting
- (2) Specifications
- (3) Cabinet Dimensions
- (4) Screen Size and Projection Distance
- (5) Pin Assignments of D-Sub COMPUTER 1 Input Connector
- (6) Compatible Input Signal List
- (7) PC Control Codes and Cable Connection
- (8) Removing and Attaching the USB Wireless LAN Unit
- (9) Troubleshooting Check List
- (10) TravelCare Guide
106
6. Using On-Screen Menu
[WIRELESS]
PROFILES (for USB Wireless LAN unit):
To execute a wireless LAN easily using Image Express Utility 2.0, select [EASY CONNECTION].
Up to two settings for the USB wireless LAN unit can be stored in memory of the projector.
Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options.
After doing this, select [OK] and press the ENTER button. This will store your settings in memory.
To recall the settings from memory:
After selecting the [WIRELESS] tab, select the [PROFILE 1] or [PROFILE 2] from the [PROFILES] list.
Select [OK] and press the ENTER button.
DHCP:
Place a check mark to automatically assign an IP address to the projector from your DHCP server.
Clear this check box to register the IP address or subnet mask number obtained from your network administrator.
IP ADDRESS .......... Set your IP address. Press to display the software keyboard and type in 12 numeric characters.
SUBNET MASK
...... Set your subnet mask number. Press to display the software keyboard and type in 12 numeric characters.
GATEWAY
.............. Set the default gateway of the network connected to the projector. Press to display the software keyboard
and type in 12 numeric characters.
DNS CONFIGURATION
.. Type in the IP address of DNS server on the network connected to the projector. Twelve numeric charac-
ters are used.
ADVANCED
............ Displays the Advanced menu which includes various setting for wireless LAN connection (NETWORK
TYPE and SECURITY). See the Advanced menu later on.
RECONNECT
.......... Use this button to retry to connect the projector to a network. Try this if you have changed [PROFILES].
NOTE: If you select [EASY CONNECTION] from [PROFILES], you cannot make settings to DHCP and its following items except
[CHANNEL] in [ADVANCED].