Operation Manual
Table Of Contents
- INDEX
- Front cover
- Important Information
- Table of Contents
- 1. Introduction
- 2. Installation and Connections
- 3. Projecting an Image (Basic Operation)
- 4. Convenient Features
- (1) Turning Off the Image and Sound
- (2) Freezing a Picture
- (3) Enlarging and Moving a Picture
- (4) Changing Lamp Mode
- (5) Getting Integrated Help
- (6) Using a USB Mouse
- (7) Using the Optional Remote Mouse Receiver (NP01MR)
- (8) Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]
- (9) Displaying Two Pictures at the Same Time
- (10) Preventing Unauthorized Use of the Projector
- (11) Limiting Access Level to Available Menu Items
- (12) Operation Using an HTTP Browser
- (13) Projecting Your Computer’s Screen Image from the Projector via a Network [NETWORK PROJECTOR]
- (14) Using the Projector to Operate Your Computer via a Network [REMOTE DESKTOP]
- 5. Using the Viewer
- 6. Using On-Screen Menu
- 7. Maintenance
- 8. Using Optional Lenses
- 9. Appendix
- (1) Troubleshooting
- (2) Specifications
- (3) Cabinet Dimensions
- (4) Screen Size and Projection Distance
- (5) Pin Assignments of D-Sub COMPUTER 1 Input Connector
- (6) Compatible Input Signal List
- (7) PC Control Codes and Cable Connection
- (8) Removing and Attaching the USB Wireless LAN Unit
- (9) Troubleshooting Check List
- (10) TravelCare Guide
113
[SECURITY]
The Security function enables you to protect your projector so that the projector will not project a signal unless you
enter a keyword. There is also an option to lock the projector by using a registered USB memory* as a protect key.
Once you have registered your USB memory as a protect key, you are required to insert the registered USB mem-
ory into the USB port of the projector each time you turn on the projector. You can enable the Security function by
using a keyword only. (
→
page 45)
* The projector does not support NTFS formatted USB memory device.
Be sure to use a USB memory device formatted with the FAT32, FAT16 or FAT file system.
To format your USB memory device in your computer, refer to the document or help file that comes with your
Windows.
ON/OFF .................. This turns the Security function on or off. This setting will take effect when the projector is turned on next
time.
KEYWORD
............. Enter an appropriate keyword when you use the Security function. (Up to 10 characters can be used.) The
Security function is available only when your keyword is entered.
USE PROTECT KEY
.. Check this box to lock your projector when using a USB memory. To use a keyword without a USB mem-
ory, do not check this box.
READ
..................... Reads data from a USB memory.
REGISTER
.............. Registers data from the USB memory. The Security function is not available unless at least one USB
memory is registered. (if the [USE PROTECT KEY] check box is selected) Up to 5 USB memory devices
can be registered.
DELETE
.................. Deletes data of a registered USB memory.
To set up a keyword to enable the Security function without using a registered USB memory.
1.
Use the SELECT
or
button to select [KEYWORD] and use the software keyboard to enter a keyword.
NOTE: Please make a note of your keyword.
2. Use the SELECT
or
button to select [OFF] and then use the SELECT
or
to select [ON].
3. Use the SELECT
or
button to select [OK] , then press the ENTER button.
The [ARE YOU SURE?] message will appear.
4. Use the SELECT
or
button to select [YES] and press the ENTER button.
The Security function takes effect.
6. Using On-Screen Menu