Operation Manual
Table Of Contents
- INDEX
- Front cover
- Important Information
- Table of Contents
- 1. Introduction
- 2. Installation and Connections
- 3. Projecting an Image (Basic Operation)
- 4. Convenient Features
- (1) Turning Off the Image and Sound
- (2) Freezing a Picture
- (3) Enlarging and Moving a Picture
- (4) Changing Lamp Mode
- (5) Getting Integrated Help
- (6) Using a USB Mouse
- (7) Using the Optional Remote Mouse Receiver (NP01MR)
- (8) Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]
- (9) Displaying Two Pictures at the Same Time
- (10) Preventing Unauthorized Use of the Projector
- (11) Limiting Access Level to Available Menu Items
- (12) Operation Using an HTTP Browser
- (13) Projecting Your Computer’s Screen Image from the Projector via a Network [NETWORK PROJECTOR]
- (14) Using the Projector to Operate Your Computer via a Network [REMOTE DESKTOP]
- 5. Using the Viewer
- 6. Using On-Screen Menu
- 7. Maintenance
- 8. Using Optional Lenses
- 9. Appendix
- (1) Troubleshooting
- (2) Specifications
- (3) Cabinet Dimensions
- (4) Screen Size and Projection Distance
- (5) Pin Assignments of D-Sub COMPUTER 1 Input Connector
- (6) Compatible Input Signal List
- (7) PC Control Codes and Cable Connection
- (8) Removing and Attaching the USB Wireless LAN Unit
- (9) Troubleshooting Check List
- (10) TravelCare Guide
52
4. Convenient Features
Editing a User (Changing Account Settings)
1. From the menu, select [SETUP]
→
[INSTALLATION(2)]
→
[SECURITY SETTINGS].
NOTE: A user with an ADMINISTRATOR account is recommended to change the account settings.
2. Select [ACCOUNT]-[SETTINGS].
The [ACCOUNT] setting screen will be displayed.
3. Select a user name you wish to edit.
4. Select [EDIT].
The [EDIT] screen will be displayed.
Enter your password and press the ENTER button.
If no password is set, simply press the ENTER button without entering any password.
5. Change the settings and select [OK].
Deleting a User
1. From the menu, select [SETUP]
→
[INSTALLATION(2)]
→
[SECURITY SETTINGS].
NOTE: A user with an ADMINISTRATOR account is recommended to delete the account settings.
2. Select [ACCOUNT]-[SETTINGS].
The [ACCOUNT] setting screen will be displayed.
3. Select a user name you wish to delete.
4. Select [DELETE].
The [DELETE] screen will be displayed.
Enter your password and press the ENTER button.
The confirmation screen will be displayed.
5. Select [YES].
This will complete deleting the user.
NOTE: Do not forget your password. If you forget your password, ask your administrator. If your administrator forget the pass-
word, ask NEC or your dealer. NEC or your dealer will provide you with your Release Code (24 character length) upon proof of
ownership.