Operation Manual
Table Of Contents
- INDEX
- Front cover
- Important Information
- Table of Contents
- 1. Introduction
- 2. Installation and Connections
- 3. Projecting an Image (Basic Operation)
- 4. Convenient Features
- (1) Turning Off the Image and Sound
- (2) Freezing a Picture
- (3) Enlarging and Moving a Picture
- (4) Changing Lamp Mode
- (5) Getting Integrated Help
- (6) Using a USB Mouse
- (7) Using the Optional Remote Mouse Receiver (NP01MR)
- (8) Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]
- (9) Displaying Two Pictures at the Same Time
- (10) Preventing Unauthorized Use of the Projector
- (11) Limiting Access Level to Available Menu Items
- (12) Operation Using an HTTP Browser
- (13) Projecting Your Computer’s Screen Image from the Projector via a Network [NETWORK PROJECTOR]
- (14) Using the Projector to Operate Your Computer via a Network [REMOTE DESKTOP]
- 5. Using the Viewer
- 6. Using On-Screen Menu
- 7. Maintenance
- 8. Using Optional Lenses
- 9. Appendix
- (1) Troubleshooting
- (2) Specifications
- (3) Cabinet Dimensions
- (4) Screen Size and Projection Distance
- (5) Pin Assignments of D-Sub COMPUTER 1 Input Connector
- (6) Compatible Input Signal List
- (7) PC Control Codes and Cable Connection
- (8) Removing and Attaching the USB Wireless LAN Unit
- (9) Troubleshooting Check List
- (10) TravelCare Guide
55
SOURCE SELECT: This switches the input connector of the projector.
COMPUTER1 ....................Switches to the COMPUTER 1 IN connector.
COMPUTER2 ....................Switches to the COMPUTER 2 IN connector.
COMPUTER3 ....................Switches to the COMPUTER 3 (DVI-D) IN connector.
COMPONENT ...................Switches to the COMPONENT IN connectors.
VIDEO ...............................Switches to the VIDEO IN connector.
S-VIDEO ...........................Switches to the S-VIDEO IN connector.
VIEWER ............................Switches to the data on the USB memory device.
NETWORK ........................Switches to a LAN signal.
PROJECTOR STATUS: This displays the condition of the projector.
LAMP LIFE REMAINING
....Displays the remaining life of the lamp as a percentage.
LAMP HOURS USED.......Displays how many hours the lamp has been used.
FILTER HOURS USED ....Displays how many hours the filter has been used.
ERROR STATUS ..............Displays the status of errors occurring within the projector.
4. Convenient Features