Operation Manual
Table Of Contents
- INDEX
- Front cover
- Important Information
- Table of Contents
- 1. Introduction
- 2. Installation and Connections
- 3. Projecting an Image (Basic Operation)
- 4. Convenient Features
- (1) Turning Off the Image and Sound
- (2) Freezing a Picture
- (3) Enlarging and Moving a Picture
- (4) Changing Lamp Mode
- (5) Getting Integrated Help
- (6) Using a USB Mouse
- (7) Using the Optional Remote Mouse Receiver (NP01MR)
- (8) Correcting Horizontal and Vertical Keystone Distortion [CORNERSTONE]
- (9) Displaying Two Pictures at the Same Time
- (10) Preventing Unauthorized Use of the Projector
- (11) Limiting Access Level to Available Menu Items
- (12) Operation Using an HTTP Browser
- (13) Projecting Your Computer’s Screen Image from the Projector via a Network [NETWORK PROJECTOR]
- (14) Using the Projector to Operate Your Computer via a Network [REMOTE DESKTOP]
- 5. Using the Viewer
- 6. Using On-Screen Menu
- 7. Maintenance
- 8. Using Optional Lenses
- 9. Appendix
- (1) Troubleshooting
- (2) Specifications
- (3) Cabinet Dimensions
- (4) Screen Size and Projection Distance
- (5) Pin Assignments of D-Sub COMPUTER 1 Input Connector
- (6) Compatible Input Signal List
- (7) PC Control Codes and Cable Connection
- (8) Removing and Attaching the USB Wireless LAN Unit
- (9) Troubleshooting Check List
- (10) TravelCare Guide
73
6. Using On-Screen Menu
Using ADVANCED menu and BASIC menu
The projector has two menu modes: the ADVANCED menu and the BASIC menu.
ADVANCED menu
.. This is the menu that contains all the available menus and commands. Users with an ADMINISTRAOR or
ADVANCED account can access the ADVANCED menu.
BASIC menu
.......... This is the basic menu that contains minimum essentials of menus and commands. Users with a BASIC
account can access the BASIC menu.
See page 51 for settings available to ADVANCED and BASIC menus.
NOTE:
• A user with an ADMINISTRATOR account that has no password set is registered at the factory.
This will allow the user to access the ACCOUNT items without password entry.
• When using your USB mouse, click each number or alphabet.
BS: Delete the character before the cursor or highlight.
OK/[
]
: Confirm the keyword and close the Software keyboard.
Entering alphanumeric characters by using Software Keyboard
[IP ADDRESS, PASSWORD] [USER NAME, PROJECTOR NAME] [PASSWORD OR KEYWORD]
1 to 0 and Characters
.............................. Use to type in password or keyword.
MODE .................... Selects one of three modes for num-
bers, alphabet and special charac-
ters.
SP .......................... Inserts a space
BS .......................... Deletes one character backward
<<
......................... Returns to the previous
>>
......................... Advances to the next
OK .......................... Executes the selection
CANCEL
................. Cancels the selection
When using the remote control:
1. Press the MENU, AUTO ADJ, SELECT
, SE-
LECT
, SELECT
or SELECT
button to se-
lect a character in the row.
Example: To enter “C”, press the SELECT
but-
ton.
2. Press the MENU, AUTO ADJ, SELECT
, SE-
LECT
, SELECT
or SELECT
button to se-
lect a character in the column.
Example: To enter “C”, press the MENU button.
EXIT ....................... Deletes a character.
ENTER ................... Makes your input take effect and
closes the input screen.
When using the mouse:
Point to a character and click it.
[BS] ....................... Deletes a character.
[ ] ........................ Makes your input take effect and
closes the input screen.