Owners manual

5. Using On-Screen Menu

[MENU]

Selecting Menu Color [COLOR SELECT]

Youcanchoosebetweentwooptionsformenucolor:COLORandMONOCHROME.

Turning On / Off Source Display [SOURCE DISPLAY]

ThisoptionturnsonoroffinputnamedisplaysuchasCOMPUTER,HDMI1,HDMI2,VIDEO,USB-A,LAN,USB-B,

tobedisplayedonthetoprightofthescreen.

Whennoinputsignalispresent,theno-signalguidancepromptingyoutocheckforanavailableinputwillbedisplayed

atthecenterofthescreen.Whenthe[USB-A]or[LAN]itemisselectedfor[SOURCE],theno-signalguidancewill

notbedisplayed.

Turning ON/OFF Control ID [ID DISPLAY]

ID DISPLAY �� This option turns on or off the ID number which is displayed when the ID SET button on the remote control

is pressed�

Turning On / Off Eco Message [ECO MESSAGE]

Thisoptionturnsonoroffthefollowingmessageswhentheprojectoristurnedon.

TheEcoMessagepromptstheusertosaveenergy.When[OFF]isselectedfor[ECOMODE],youwillgetamessage

topromptyoutoselect[AUTOECO],[NORMAL],or[ECO]for[ECOMODE].

When[AUTOECO],[NORMAL],or[ECO]isselectedfor[ECOMODE]

Toclosethemessage,pressanyoneofthebuttons.Themessagewilldisappearifnobuttonoperationisdonefor

30 seconds.

When[OFF]isselectedfor[ECOMODE]

PressingtheENTERbuttonwilldisplaythe[ECOMODE]screen.(→page31)

Toclosethemessage,presstheEXITbutton.