Operation Manual
Table Of Contents
- Front cover
- Important Information
- Table of Contents
- 1. Introduction
- 2. Projecting an Image (Basic Operation)
- (1) Flow of Projecting an Image
- (2) Connecting Your Computer/Connecting the Power Cord
- (3) Turning on the Projector
- (4) Selecting a Source
- (5) Adjusting the Picture Size and Position
- (6) Correcting Keystone Distortion [KEYSTONE]
- (7) Optimizing Computer Signal Automatically
- (8) Turning Up or Down Volume
- (9) Turning off the Projector
- (10) When Moving the Projector
- 3. Convenient Features
- (1) Turning off the Image and Sound
- (2) Freezing a Picture
- (3) Magnifying a Picture
- (4) Changing Eco Mode/Checking Energy-Saving Effect
- (5) Using 4-Point Corner to Correct Keystone Distortion [CORNERSTONE]
- (6) Preventing the Unauthorized Use of the Projector [SECURITY]
- (7) Operating Your Computer’s Mouse Functions from the Projector’s Remote Control via the USB Cable (Remote Mouse Function)
- (8) Projecting Your Computer’s Screen Image from the Projector via the USB Cable (USB Display)
- (9) Controlling the Projector by Using an HTTP Browser
- (10) Projecting an Image from an Angle (Geometric Correction Tool in Image Express Utility Lite)
- 4. Using the Viewer
- 5. Using On-Screen Menu
- 6. Installation and Connections
- 7. Maintenance
- 8. Appendix
- (1) Troubleshooting
- (2) Specifications
- (3) Cabinet Dimensions
- (4) Pin Assignments of D-Sub COMPUTER Input Terminal
- (5) Compatible Input Signal List
- (6) PC Control Codes and Cable Connection
- (7) Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool)
- (8) Troubleshooting Check List
- (9) REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and Mexico)

33
3. Convenient Features
❼
Operating Your Computer’s Mouse Functions from the
Projector’s Remote Control via the USB Cable (Remote Mouse
Function)
Thebuilt-inremotemousefunctionenablesyoutooperateyourcomputer’smousefunctionsfromthesuppliedremote
controlwhentheprojectorisconnectedtoacomputerviaacommerciallyavailableUSBcable(compatiblewithUSB
2.0specications).
PresstheUSB-Bbuttonontheremotecontrol,orselect[USB-B]forthesourceontheOn-screenmenu.
• UsingtheUSBcabletoconnecttheprojectorandthecomputerwillalsostartUSBDisplayfunction.
• WhenyouconnectyourcomputerandtheprojectorbyaUSBcableforthersttime,yourcomputerwillreadin
thesoftware.ItwilltakefewminutesforstartinguptheUSBdisplay.
USB cable (not supplied)
NOTE:
• AUSBcablemustsupporttheUSB2.0Specications.
• Themousefunctioncanbeusedwiththefollowingoperatingsystems:
Windows7,WindowsXP,WindowsVista
• Waitatleast5secondsafterdisconnectingtheUSBcablebeforereconnectingitandviceversa.Thecomputermaynotidentify
theUSBcableifitisrepeatedlyconnectedanddisconnectedinrapidintervals.
• ConnecttheprojectortothecomputerwithaUSBcableafterstartingthecomputer.Failuretodosomayfailtostartthecomputer.
Operating your computer’s mouse from the remote control
Youcanoperateyourcomputer’smousefromtheremotecontrol.
PAGE ▽/△ Button ���������������������������scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint
on your computer�
▲▼◀▶ Buttons ������������������������������moves the mouse cursor on your computer�
MOUSE L-CLICK/ENTER Button ������works as the mouse left button�
MOUSE R-CLICK Button ������������������works as the mouse right button�
NOTE:
• Whenyouoperatethecomputerusingthe▲▼◀or▶buttonwiththemenudisplayed,boththemenuandthemousepointer
willbeaffected.Closethemenuandperformthemouseoperation.
TIP:YoucanchangethePointerspeedontheMousePropertiesdialogboxontheWindows.Formoreinformation,seetheuser
documentationoronlinehelpsuppliedwithyourcomputer.