Operation Manual
Table Of Contents
- Front cover
- Important Information
- Table of Contents
- 1. Introduction
- 2. Projecting an Image (Basic Operation)
- (1) Flow of Projecting an Image
- (2) Connecting Your Computer/Connecting the Power Cord
- (3) Turning on the Projector
- (4) Selecting a Source
- (5) Adjusting the Picture Size and Position
- (6) Correcting Keystone Distortion [KEYSTONE]
- (7) Optimizing Computer Signal Automatically
- (8) Turning Up or Down Volume
- (9) Turning off the Projector
- (10) When Moving the Projector
- 3. Convenient Features
- (1) Turning off the Image and Sound
- (2) Freezing a Picture
- (3) Magnifying a Picture
- (4) Changing Eco Mode/Checking Energy-Saving Effect
- (5) Using 4-Point Corner to Correct Keystone Distortion [CORNERSTONE]
- (6) Preventing the Unauthorized Use of the Projector [SECURITY]
- (7) Operating Your Computer’s Mouse Functions from the Projector’s Remote Control via the USB Cable (Remote Mouse Function)
- (8) Projecting Your Computer’s Screen Image from the Projector via the USB Cable (USB Display)
- (9) Controlling the Projector by Using an HTTP Browser
- (10) Projecting an Image from an Angle (Geometric Correction Tool in Image Express Utility Lite)
- 4. Using the Viewer
- 5. Using On-Screen Menu
- 6. Installation and Connections
- 7. Maintenance
- 8. Appendix
- (1) Troubleshooting
- (2) Specifications
- (3) Cabinet Dimensions
- (4) Pin Assignments of D-Sub COMPUTER Input Terminal
- (5) Compatible Input Signal List
- (6) PC Control Codes and Cable Connection
- (7) Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool)
- (8) Troubleshooting Check List
- (9) REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and Mexico)

67
5. Using On-Screen Menu
❻ Menu Descriptions & Functions [SETUP]
[GENERAL]
EnablingAutoKeystone[AUTOKEYSTONE]
Thisfeatureallowstheprojectortodetectitstiltandcorrectverticaldistortionautomatically.
ToturnontheAUTOKEYSTONEfeature,select[ON].ToadjusttheKEYSTONEfeaturemanually,select[OFF].
NOTE:
• The[AUTOKEYSTONE]functionisnotavailablewhenanorientationtypesuchas[CEILINGREAR],[DESKTOPREAR],[CEILING
FRONT]otherthan[DESKTOP/FRONT]isselectedfor[ORIENTATION].
• Whilethe[AUTOKEYSTONE]is[ON],thefollowingfunctionsarenotavailable,[PINCUSHIONLEFT/RIGHT],[PINCUSHIONTOP/
BOTTOM],and[CORNERSTONE].
TIP
• Adjustableanglerangebythe[AUTOKEYSTONE]isapprox.30degreesinverticaldirection.
• Duringprojectingimage,[AUTOKEYSTONE]willbestartedtoperformapprox.2secondsafterxingthethrowangle.
CorrectingKeystoneDistortionManually[KEYSTONE]
Youcancorrecthorizontalorverticalkeystone,pincushionLEFT/RIGHTorTOP/BOTTOM,orcornerstonedistortion
manually.
NOTE:
• [KEYSTONEHORIZONTAL]and[KEYSTONEVERTICAL]canbeadjustedatonce.
• Tochangefromoneitemtoanotheritem,resettherstitem.
• Adjustmentvalueswillbeoverwritten.Theywillnotbedeletedevenwhentheprojectoristurnedoff.
• Using[KEYSTONE],[PINCUSHION]and[CORNERSTONE]correctioncancausetheimagetobeslightlyblurredbecausethe
correctionismadeelectronically.
• Whenthe[AUTOKEYSTONE]hasbeen[ON].itautomaticallyperformsverticalkeystonecorrectioneverytimetheprojectoris
poweredon.
KEYSTONE HORIZONTAL ��������� Corrects horizontal keystone distortion� (→ page 18)
KEYSTONE VERTICAL
��������������� Corrects vertical keystone distortion� (→ page 18)
PINCUSHION LEFT/RIGHT
�������� Corrects pincushion distortion at the left or right side� (→ page 28)
PINCUSHION TOP/BOTTOM
����� Corrects pincushion distortion at the top or bottom side� (→ page 28)
CORNERSTONE
������������������������ Fits a projected image within the border of the screen easily by align the four corner of an image
to the ones of the screen� (→ page 26)
RESET
��������������������������������������� Returns all the above items to the factory preset values�