Operation Manual

74
5. Using On-Screen Menu
Selecting Signal Format [SIGNAL SELECT]
[COMPUTER]
Allowsyoutochoose[COMPUTER]foranRGBsourcesuchasacomputer,or[COMPONENT]foracomponent
videosourcesuchasaDVDplayer.Normallyselect[RGB/COMPONENT]andtheprojectorautomaticallydetects
acomponentsignal.Howevertheremaybesomecomponentsignalsthattheprojectorisunabletodetect.Ifthisis
thecase,select[COMPONENT].
[VIDEO]
Thisfeatureenablesyoutoselectcompositevideostandardsautomaticallyormanually.
Factorydefaultsettingis[AUTO]andtheprojectorwillautomaticallydetectthevideostandard.
Inthecasewheretheprojectorhasdifficultydetectingthevideostandard,selecttheappropriatevideostandardfrom
the menu.
EnablingorDisablingWXGAMode[WXGAMODE]
Selecting[ON]willgiveprioritytoWXGA(1280×768)/WUXGA(1920×1200)signalsinrecognizinganinputsignal.
When[WXGAMODE]issetto[ON],XGA(1024×768)/UXGA(1600×1200)signalsmaynotberecognizedon
ME401X/ME361X/ME331X/ME301X.Inthiscase,select[OFF].
NOTE:
• [OFF]isselectedatthetimeofshipmentofME401X/ME361X/ME331X/ME301X.
• [ON]isselectedatthetimeofshipmentofME401W/ME361W/ME331W/ME301W.
Enabling the deinterlace [DEINTERLACE]
Turnsonoroffthedeinterlacefunctionforatelecinesignal.
OFF ������������������������ Select this option if there is any jitter or artifacts in video�
ON ������������������������� Default standard setting�
NOTE:ThisfeatureisnotavailableforHDTV(progressive)andcomputersignals.
Setting HDMI1 & HDMI2 [HDMI SETTINGS]
MakethesettingsforeachvideolevelwhenconnectingHDMI1equipmentsuchasaDVDplayer.
VIDEO LEVEL ��������� Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NOR-
MAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image
contrast and increase detail in the dark areas�
Setting Audio [AUDIO SELECT]
MakethesettingsforeachaudiolevelwhenconnectingHDMIequipment,yournetwork,andUSB(PC)terminal.
Selectbetweeneachequipmentandcomputer.
HDMI1, HDMI2 ����������� Select [HDMI1] or [HDMI2] to switch the HDMI1 IN or HDMI 2 IN digital audio signal or select [COMPUTER]
to switch the COMPUTER input audio signal�
LAN ������������������������ Select [LAN] or [COMPUTER] to switch the source connected to the network�
USB-B �������������������� Select [USB-B] or [COMPUTER] to switch the source connected over the USB cable (USB-B)�