Operation Manual

78
5. Using On-Screen Menu
Setting up the Projector for a Wired LAN Connection [WIRED LAN]
Important
• Consultwithyournetworkadministratoraboutthesesettings.
• WhenusingawiredLANconnection,connectaLANcable(Ethernetcable)totheLANport(RJ-45)ofthepro-
jector.(→page96)
TIP:Thenetworksettingsyoumakewillnotbeaffectedevenwhen[RESET]isdonefromthemenu.
[WIREDLAN] [DISABLE] WiredLANconnectionwillbeturnedoff.
[ENABLE] WiredLANconnectionwillbeturnedon.
[SETTINGS] [DHCP] ON ��������������������������IP address, subnet mask, and gateway will
be automatically assigned to the projector
from your DHCP server�
OFF �������������������������Specify IP address, subnet mask, and gate-
way assigned by your network administrator�
[IPADDRESS] Set your IP address of the network connected to the
projector.
[SUBNETMASK] Setyoursubnetmasknumberofthenetworkconnected
to the projector.
[GATEWAY]
Setthedefaultgatewayofthenetworkconnectedtothe
projector.
[AUTODNS] ON ��������������������������DHCP server will automatically assign IP
address of DNS server connected to the
projector�
OFF �������������������������Set your IP address of DNS server connected
to the projector�
[RECONNECT] Retrytoconnecttheprojectortoanetwork.