Operation Manual

2
1. Introduction
❷ Introduction to the Projector
Thissectionintroducesyoutoyournewprojectoranddescribesthefeaturesandcontrols.
Features you’ll enjoy:
• Quickstart(6seconds*
1
),QuickPowerOff,DirectPowerOff
6 seconds*
1
afterturningonthepower,theprojectorisreadytodisplayPCorvideoimages.
 Theprojectorcanbeputawayimmediatelyaftertheprojectorispowereddown.Nocooldownperiodisrequired
after the projector is turned off from the remote control or cabinet control panel.
 Theprojectorhasafeaturecalled“DirectPowerOff”.Thisfeatureallowstheprojectortobeturnedoff(evenwhen
projectinganimage)byusingtheMainPowerSwitchordisconnectingtheACpowersupply.
 ToturnofftheACpowersupplywhentheprojectorispoweredon,useapowerstripequippedwithaswitchand
abreaker.
*
1
 Thequickstarttimeisonlywhen[STANDBYMODE]issetto[NETWORKSTANDBY]intheon-screenmes-
sage.
• 0.23W(100-130VAC)/0.45W(200-240VAC)instandbyconditionwithenergysavingtechnology
 Selecting[NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode that
consumesonly0.23W(100-130VAC)/0.45W(200-240VAC).
• CarbonMeter
 Thisfeaturewillshowenergy-savingeffectintermsofCO
2
emissionreduction(kg)whentheprojector’s[ECO
MODE]issetto[AUTOECO],[NORMAL],or[ECO].
 TheamountofCO
2
emissionreductionwillbedisplayedintheconrmationmessageatthetimeofpower-offand
intheINFOoftheon-screenmenu.
• Lamplifeupto9000hours*
2
 UsinginEcoMode(ECO)allowsyoutoprolongtheprojector’slamplifeupto9000hours(upto4000hoursin
ECOMODEOFF).
• TwoHDMIinputssupportdigitalsignals
 ThetwoHDMIinputsprovideHDCPcompatibledigitalsignals.TheHDMIinputalsosupportsaudiosignal.
• IntegratedRJ-45terminalforwirednetworkingcapabilityalongwithwirelessnetworkingcapabilities
 AnRJ-45terminalisstandard.AnoptionalUSBWirelessLANUnitisrequiredforwirelessLANconnection.
• SmartConnection
 Itenableseasilytoconnectyourprojectortocomputersorsmartphones,onwhichtheapplicationsoftware,Mul-
tiPresenter,hasbeeninstalled,byinputtingPINcode.
• 20Wbuilt-inspeakerforanintegratedaudiosolution
 Powerful20wattmonauralspeakerprovidesvolumeneedforlargerooms.
• ThesuppliedremotecontrolallowsyoutoassignaCONTROLIDtotheprojector
 Multipleprojectorscanbeoperatedseparatelyandindependentlywiththesamesingleremotecontrolbyassigning
anIDnumbertoeachprojector.
• USBDisplay
 UsingacommerciallyavailableUSBcable(compatiblewithUSB2.0specications)toconnectthecomputerwith
theprojectorallowsyoutosendyourcomputerscreenimagetotheprojectorwithouttheneedofatraditional
computercable(VGA).