User Manual

1. Introduction

Battery Installation

1. Press ﬁrmly and slide the bat-

tery cover off.

2. Install new batteries (AAA).

Ensure that you have the bat-

teries’ polarity (+/−) aligned

correctly.

3. Slip the cover back over the

batteries until it snaps into

place. Do not mix different

types of batteries or new and

old batteries.

OPEN

Remote Control Precautions

• Handletheremotecontrolcarefully.

• Iftheremotecontrolgetswet,wipeitdryimmediately.

• Avoidexcessiveheatandhumidity.

• Donotshort,heat,ortakeapartbatteries.

• Donotthrowbatteriesintore.

• Ifyouwillnotbeusingtheremotecontrolforalongtime,removethebatteries.

• Ensurethatyouhavethebatteries’polarity(+/−)alignedcorrectly.

• Donotusenewandoldbatteriestogether,orusedifferenttypesofbatteriestogether.

• Disposeofusedbatteriesaccordingtoyourlocalregulations.

Operating Range for Wireless Remote Control

30°

22 feet/7 m22 feet/7 m

Remote sensor on

projector cabinet

Remote control

• Theinfraredsignaloperatesbyline-of-sightuptoadistanceofabout22feet/7mandwithina60-degreeangle

of the remote sensor on the projector cabinet.

• Theprojectorwillnotrespondifthereareobjectsbetweentheremotecontrolandthesensor,orifstronglight

fallsonthesensor.Weakbatterieswillalsopreventtheremotecontrolfromproperlyoperatingtheprojector.